Cam Follower Bearing

Approx. Rs 2,000 / Piece Get Latest Price

Product Brochure

JESA is a top-quality, reliable global partner for applications such as machines used in packaging, printing, textiles and transport, as well as high-speed and high-precision linear guidance applications.

Examples of industrial applications:

• Textiles machines
• Woodworking machines
• Packaging machines
• Printing machines
• Machine tools
• Agricultural machinery and equipment
• Electric motors
• Vacuum pumps
• Forklift trucks
• Linear guides
• Conveyers

ADVANTAGES

• Low noise, low vibration, highest lifetime
• Optimized sealing (no grease leakage, low friction, dust protection)
• Low acoustic noise • High speed, high precision
• Used in many applications (rings in 100Cr6 or 1.4125, specific greasing and sealing)
• Direct contact with manufacturer and designers
• Short delivery time (stainless steel version on request)

Approx. Rs 1,850 / Unit Get Latest Price

NTN track roller complete with stud instead of inner ring, which is designed to operate with its outer ring rolling on the track. These NTN stud type track rollers are applied to eccentric roller, guide roller, rocker arm roller,etc. Similarly to the roller followers. One end of the stud is threaded and the hexagonal nut is used to be mounted easily.The cam follower types marked with a suffix including “F” are product per new standard specification. They are identically to the conventional products in terms of fitting method and lubrication method, but boast improved functionality through crowned rollers and special heat treatment.

Following type track roller are available:

• KRM XH
• KRMV XH type
• KR H type
• KRT type
• KRVT type
• KRU type
• KRVU type
• NUKR H type
• NUKRT type
• NUKRU type
• CR H type
• CRV H type

Approx. Rs 3,500 / Unit Get Latest Price

McGILL Unmounted bearing assembly consisting of hardened precision ground inner and outer raceways with either full complement or separated needle, ball, tapered or cylindrical rolling elements constructed with an integral stud or precision ground bore. Cam follower bearings provide an anti-friction solution for translating rotation to linear motion or supporting either pure radial or combination thrust loads depending on the rolling element types.

McGill CAMROL Cam Followers:

McGill® CAMROL® full complement needle bearings feature black oxide treated bearing steel, and are available in two basic mounting styles for use in mechanical automation or linear motion applications.

McGill Corrosion Resistant Cam Followers:

McGill® CAMROL® full complement needle bearings feature 400 series stainless steel material and are available in two basic mounting styles for use in mechanical automation or linear motion applications.

McGill TRAKROL Cam Followers:

TRAKROL® bearings feature black oxide treated bearing steel and utilize either a precision ball or tapered roller bearing insert for longer operating life under combination radial and thrust loads.

McGill Heavy Duty Cam Followers:

McGill Heavy-Duty CAMROL® bearings are full complement cylindrical roller bearings featuring black oxide treated bearing steel, available in two basic mounting styles (stud or yoke) for use mechanical automation or linear motion applications.

McGill Special-Duty Cam Followers:

Special-Duty CAMROL bearings are available feature black oxide treated bearing steel in both inch and metric sizes for your motion control needs.

Approx. Rs 560 / Piece Get Latest Price

Product Brochure
IKO Cam Follower Bearing Type This is the basic form of cam follower. Line up of size variations range from and they can be used for a very broad range of applications.

IKO Cam Follower Stud Type CFES:

Since the stud is designed with eccentricity, by rotating the stud, alignment is possible, and adjustments can be made easily so that the load distribution to the outer ring outside diameter surface will be uniform. It is an eccentric cam follower with integrated structure in which attachment can be made to the same attachment holes as the Standard Cam Follower. The amount of eccentricity is 0.25 mm - 0.6 mm.

IKO Cam Follower CFE:

Since eccentric collar is fixed to the stud, positioning in the radial direction against the opposing track surface can be conducted easily.

IKO CAM Follower CF.W:

Since a special synthetic resin thrust washer that has excellent wear resistance and heat resistance is built into the sliding contact portions among both shoulder portions of the outer ring and stud head as well as the side plate, it will receive axial load of the outer ring generated by attachment errors, etc., and it has the effect of preventing wear and friction of the sliding surface.

IKO Cam Follower CF-RU1/CF-FU1:

Since tap hole processing is conducted on the stud for centralized piping, it is most suitable for places where centralized piping of oil supply is necessary.

IKO CAM Follower CFS Type:

This is a bearing that has extremely fine needle-type rollers built into the outer ring, and it is designed compactly so that the outside diameter of the outer ring is small in comparison with the stud diameter. It is used in electronics parts machinery, OA (Office Automation) equipment and small index devices.

IKO CAM Follower Heavy Duty NUCF:

This is a full complement roller bearing that has double row cylindrical rollers built into the outer ring. It is able to receive large radial load and a certain amount of axial load.

Approx. Rs 2,500 / Unit Get Latest Price

INA Cam Follower Bearing including KR, KRE & KRV stud type Cam follower bearings, as well as NUKR & NUKRE type Cam follower bearings. They are all available in INA brand.

The outer rings of regular ball and roller bearings are typically mounted in rigid housings providing support around the entire circumference. Individual roller forces are transmitted through the outer ring directly into the housing with no major deformations.

By contrast, cam followers and yoke rollers are supported at a single point on their circumference. Individual roller forces produce bending moments on the outer ring around the point of contact. The effects are outer ring deformation with reversed bending stresses in dynamic applications, a reduced load zone, and a higher maximum roller load.

INA Cam Followers:

To keep deformation to a minimum, the outer ring of a cam follower must have a considerably heavier cross section than a standard bearing. This requirement conflicts with the desire for maximum dynamic bearing capacity requiring as large of a roller diameter as possible.

Approx. Rs 7,500 / Unit Get Latest Price

Smith bearing offer a complete line of stud type and yoke type cam followers for industrial applications. These Smith Cam Follower Bearing are available in steel, stainless steel, and with engineered plastic internal bushings. We specialize in engineered cam followers to fit specific applications.

Approx. Rs 3,500 / Unit Get Latest Price

THK Cam Follower Bearing is a compact bearing with a high-rigidity shaft and a built-in needle bearing. Most suitable as a guide roller for cam mechanisms and linear motion of automated machines and dedicated machines.

THK Model CF:

This model is a low-price Cam Follow having a driver groove or hexagon socket in the stud head. The all-stainless steel type (symbol M) is optimal for clean room applications since it does not develop rust from external atmosphere and generates little dust.

THK Model CFT:

Basically the same as the popular type Cam Follower, this model is provided with tapped holes for piping on the stud head and the thread. It is optimal for locations where an integrated piping system for greasing is required.

THK Model CFH:

This model can be installed in the same mounting hole as that of the popular type Cam Follower. Since the mounting shaft of the stud and the stud head are eccentric by 0.25 mm to 1.0 mm, the position of this model can easily be adjusted simply by turning the stud. Thus, it is a compact, highly accurate eccentric cam follower with an integral structure.

THK Model CFN:

Based on the popular type Cam Follower, this model is incorporated with thrust load balls. It is capable of receiving an axial load generated by a mounting error.

Approx. Rs 8,500 / Unit Get Latest Price

Osborn Cam Follower, INC., a division of Jason, Inc., evolved from the Osborn Manufacturing Corp. Osborn Manufacturing had grown into the world’s largest manufacturer of industrial brushes and foundry machines by the 1940s. The firm was organized and founded in 1887 by a group of investors headed by John Osborn and has evolved as the leader in idler roller & cam follower innovation.

Flanged Crowned Eccentric Stud Plain Yoke Flanged Eccentric Stud V-Groove Concentric Stud Flanged YokeV-Groove Eccentric Stud Heavy Duty Shafts V-Groove Yoke Plain Concentric Stud

CAM RUNNER® idler-rollers give designers a new way to control linear motion and support the lighter loads that don’t require the heavy-duty performance of Osborn’s Load Runners idler-rollers. Although they’re dimensionally interchangeable with conventional needle-bearing cam followers, they provide important performance features no needle-bearing can deliver.No lubrication, no contamination

Load Rails Osborn Load Rails are hardened on the rolling surface to 60-65 Rc and offer rail loadings of up to 71.500 lbs (317450 N) per roller.
Load Runners Styles Each of the new styles of Osborn Load Runners was originally developed as a "special" to satisfy the requirements of extraordinary loads and severe environments. And each has been proven in thousands of hours of customer applications. NYLON TREAD Cost-effective performance in applications requiring a non-metallic outer face.

URETHANE TREADProven in special applications calling for a wear-resistant, non-metallic rolling surface.STAINLESS STEELUse where corrosive or other conditions make standard steel rollers unsuitable.
HIGH-TEMPERATUREFor ovens, galvanizing lines, heat treat furnaces and industrial dryers. Solid Lubricant Now Available Osborn's latest innovation in the Load Runner line is the addition of MicroPoly® solid lubricant to the bearing assemblies. It is now available for special Load Runners orders, for hard-to-service or extra-heavy-duty applications.

Approx. Rs 8,500 / Unit Get Latest Price

RBC Cam Follower Bearing produces a full line of cam followers from 1/2 to 10 inch outside diameter sizes. Technical innovation and cost-saving features have distinguished RBC cam followers from competitors. Contact RBC engineers for assistance in solving difficult bearing challenges in your application.

RBC Cam Follower Bearing:

• RBC
• RBY

RBC Cam Follower Bearing:

• S - Slotted Head
• S - L - Slotted Head and Sealed
• S - LW - Hexlube - relubricatable hex head

RBC Cam Follower Bearing Standard Stud Series:

• CS - L - Slotted Head and Sealed
• CS - LW - Hexlube - relubricatable hex head

Cam-Centric Adjustable Cam Followers:

• S - LWX - Cylindrical Hexlube - relubricatable hex head
• CS - LWX - Crowned Hexlube - relubricatable hex head

RBC Cam Follower Bearing - Heavy Stud:

• H - Slotted Head
• H - L - Slotted Head and Sealed
• H - LW - Hexlube - relubricatable hex head