Ceramic Bearing

Approx. 5,200 / Unit Get Latest Price

ZrO2 Angular contact ball ceramic bearings Angular contact ball bearings are able to support radial load and axial load. As single row angular contact ball bearings can only support axial load in single direction, matched bearing mounting is often adopted to them. As matched pairs of bearings, preload for them is more convenient

Approx. 15,000 / Unit Get Latest Price

Silicon carbide is composed of tetrahedra of carbon and silicon atoms with strong bonds in the crystal lattice. This produces a very hard and strong material. Silicon carbide is not attacked by any acids or alkalis or molten salts up to 800°C. In air, SiC forms a protective silicon oxide coating at 1200°C and is able to be used up to 1600°C. The high thermal conductivity coupled with low thermal expansion and high strength give this material exceptional thermal shock resistant qualities. Silicon carbide ceramics with little or no grain boundary impurities maintain their strength to very high temperatures, approaching 1600°C with no strength loss. Chemical purity, resistance to chemical attack at temperature, and strength retention at high temperatures has made this material very popular as wafer tray supports and paddles in semiconductor furnaces. The electrical conduction of the material has lead to its use in resistance heating elements for electric furnaces, and as a key component in thermistors (temperature variable resistors) and in varistors (voltage variable resistors).

Approx. 7,500 / Piece Get Latest Price

ZrO2 Deep groove ceramic ball bearings Deep groove ball bearings mainly take radial load as well as take moderate axial load. With less coeffcient of friction Full ceramic bearing ZrO2 material has perfect propriety such like suitable for low and high temperatures, high load capacity, corrosion resistance, nonmagnetic insulated and self lubrication. Thus it suit for the specific applications which are not available for bearing steel and hybrid construction ceramic ball bearing materials

Approx. 400 / Piece Get Latest Price

Deep groove ball bearings mainly take radial load as well as take moderate axial load. With less coefficient of friction, high limiting speed, large size range and shape variations of diversify. Full ceramic bearing Si3N4 material Full ceramic bearing Si3N4 material has similar propriety as ZrO2 material, besides it has low weight , good wear resistance, high hardness, and it can bear higher temperature than ZrO2 material.

Approx. 4,500 / Unit Get Latest Price

We can supply full Ceramic Bearing ZrO2 material/full ceramic bearing Si3N4 material/ full ceramic bearing SiC material/full ceramic bearing Al2O3 material. And Hybrid ceramic bearing, Plastic bearing and Stainless bearing etc. All the types of ceramic materials according to your purpose. We also make customized bearings as per samples or drawings for clients.

Full Ceramic Bearing ZrO2 Material:

Full ceramic bearing ZrO2 material has perfect propriety such like suitable for low and high temperatures, high load capacity, corrosion resistance, nonmagnetic insulated and self lubrication. Thus it suit for the specific applications which are not available for bearing steel and hybrid construction ceramic ball bearing materials.

Full Ceramic Bearing Si3N4 Material:

Full ceramic bearing Si3N4 material has similar propriety as ZrO2 material, besides it has low weight, good wear resistance, high hardness, and it can bear higher temperature than ZrO2 material

Full Ceramic Bearing SiC Material:

Compare with other 3 types of ceramic materials, full ceramic bearing SiC material is more outstanding in these aspects: higher chemical corrosion resistance, better strength, higher hardness, higher wear resistance, lower frictional properties, and suitable for the highest temperature.

Full Ceramic Bearing Al2O3 Material:

Full ceramic bearing Al2O3 material which uses 99% Al2O3 ceramic, its rolling parts are also using Al2O3 ceramic as well.

Full Ceramic Plain Bearing:

Main material for full ceramic plain bearing are ZrO2, Si3N4 andSiC ceramic, diversified dimension can be produced according to the customer require.

Approx. 9,900 / Unit Get Latest Price

Full Ceramic Bearing Al2O3 Material

Full ceramic bearing Al2O3 material which uses 99% Al2O3 ceramic, its rolling parts are also using Al2O3 ceramic as well.

Al2O3 Deep groove ceramic ball bearings
Deep groove ball bearings mainly take radial load as well as take moderate axial load. With less coeffcient of friction, high limiting speed, large size range and shape variations of diversify.

Al2O3 Self-aligning ball ceramic bearings
With two structures of bore cylindrical and conical, retainers made of steel sheet or synthetic tesins, the bearings are

Al2O3 Thrust ball ceramic bearings
This type of bearings is separable, which can only carry axial load, the single direction bearings of them can only carry axial load in one direction, while the double can carry alternating axial load in either directions. Before using they have to be preloaded. The thrust ball bearings are used in lathe centers

Approx. 9,500 / Unit Get Latest Price

Si3N4 Full ceramic bearing of full complement balls has an add-ball gap on its side. Because using no retainer design, the bearing is able to install more ceramic balls than the standard construction, so the heavier load ability increased more. In addition, to avoid the limited of the retainer’s material, this bearing is same as the full ceramic bearing of ceramic cage has corrosion resistance and high temperature application. This series of bearing is not for high –speed choice, it should be to install on the unforced side.

Approx. 6,500 / Unit Get Latest Price

Hybrid Bearing made (ZrO2 or Si3N4 balls + PEEK cage) ceramic ball bearing, inner ring and outer ring are made by metal, GCr15 or AISI440C makes inner ring and outer ring. Ceramic ball have the following performance as low density, high strength, low friction, wear resistance, self-lubrication and higher rigidity, it’s the best choice for rollers of the hybrid construction ceramic which are used in high-speed, high-precision and long life applications.

Approx. 1,800 / Unit Get Latest Price

Ceramic Speed Bearings from Denmark feature rolling balls made of a ceramic material. The Ceramic Speed balls are constructed of Grade 3 Silicon Nitride, the highest grade for hybrid ceramic bearing, which meets or exceeds NASA engineering standards. Using Ceramic Speed bearings in hubs, bottom brackets, and pulleys will reduce friction. By reducing the coefficient of friction, you can accelerate faster and maintain speed with less power input. Benefits of ceramic bearings: Ceramic bearings have 10% less friction than steel bearings. Bearings are extremely wear resistant because ceramic material is much harder than the hardest steel bearings. Silicon nitride balls are 60% lighter than steel balls. Safe operation even when using low amounts lubricant, which reduces the viscous drag friction from lubricant. When used with special seals and lubrication, the friction in ceramic bearings can be 20-30 times lower than steel bearings with standard friction seals and standard lubrication. Wheelbuilder uses Ceramic Speed hybrid ceramic bearings for all high-end applications. Compared to all steel bearings, they have lower friction, lighter weight and longer service life. They are also less susceptible to failures caused by dirt, dust and poor lubrication. Ceramic bearing upgrades can be made to the main hub body as well as the freehub body. Ceramics provide the most significant gain when used in the main hub body because these bearings carry the primary rider loads. Ceramic Speed develop and produce ball bearings which create significant economic advantages when used in industrial applications. For the past 10 years we have worked on developing and improving bearing performance, using high-tech components and today we are the world leaders in our field. We have specialised in producing hybrid bearings for 2 areas: sport and industry. All bearings are handmade in Denmark using components from the best suppliers in the world. We have many years of experience developing hybrid bearing solutions for industrial applications, using ceramic balls of a unique quality together with other specially developed components. Ceramic Speed bearings have unique properties, which can solve challenges where ordinary steel bearings arent good enough. In addition to this Ceramic Speed bearings have a lifetime which is 4-8 times longer than steel bearings; this simplifies maintenance and increases up time in industrial production. Bearings that last! The cost of bearings themselves forms a very small part of the total cost of the machines in which they are installed - both in new machinery and in maintenance. However, the cost of maintaining or replacing bearings can be much higher. This means that bearings that last longer can reduce operating costs significantly. Share on facebook