Approx. Rs 1,000 / Piece Get Latest Price
|Minimum Order Quantity||5 Piece|
|Maximum Dynamic Loading||120n/mm2|
Approx. Rs 8,500 / Unit Get Latest Price
GRAPHALLOY, a graphite/metal alloy, is ideally suited to applications where temperatures are too high to permit the use of oil or other lubricants. GRAPHALLOY High Temperature Bearings and Bushings will not soften at extreme temperatures or extrude under load. Many grades are suitable for temperatures to 750°F (400°C) in air. In addition, special grades provide service up to 1000°F (535°C) and higher in non-oxidizing atmospheres.
Use GRAPHALLOY Bearings and Bushings in bakery and industrial ovens, glass plants, conveyors, dryers, kilns, kiln cars, stokers, soot blowers, oil guns, gypsum board and veneer dryers ...wherever temperatures are too high to permit the use of oil or greases.
GRAPHALLOY a graphite/metal alloy, is a unique self-lubricating bearing material that offers superior performance in hundreds of mechanical and electrical applications.
GRAPHALLOY standard and custom designed products provide lifetime cost savings and significant operating advantages over conventional bushings and bearings.
FLANGE TYPE BUSHINGS
These easy to mount standard flange bushings are used widely throughout industry. Available in grades to provide solutions to the most difficult bearing problems. The 317 flange bushings are designed to handle both radial and thrust loads.BLOCK TYPE BUSHINGS
Excellent solutions for submerged applications, these GRAPHALLOY block bushings are used primarily in the textile finishing industry in dye & bleach ranges, wash boxes and dye jigs to replace cast iron, plastic or stainless steel bushings.SPLIT DOUBLE FLANGE BUSHINGS
Able to survive harsh environments, these split double flanged bushings are commonly used in screw or spiral conveyor or feeders for moving a large variety of bulk materials. They are also used for mixing, in agitators or batch mixers. GRAPHALLOY never requires lubrication so the conveyed product is not contaminated and does not collect in the bearingHIGH TEMPERATURE BUSHINGS
These GRAPHALLOY bushings are self-lubricating, contain no oil and provide long service life in high temperature bearing applications such as industrial ovens, conveyors, and overhead paint lines. Standard sizes fit common overhead paint line conveyors used in high temperature drying ovenHIGH TEMPERATURE THRUST WASHERS
These thrust washers provide a high temperature solution for thrust loads in conveyor bushings, traction wheel bushings, pillow blocks, and similar applications.
Approx. Rs 8,500 / Unit Get Latest Price
Permaglide® plain bearings are bearings for very small radial or axial design envelopes. These products are available as bushes, flanged bushes, thrust washers and strips and in two groups of materials. The bushes are available not only in metric sizes but also in inch sizes.
Bushes, washers and strips are supplied in the maintenance-free Permaglide® P1 or the low-maintenance P2. Flanged bushes are made from the maintenance-free Permaglide® P1.
Embodies the product characteristic of a permanently, low-wear gliding. By applying a plastic material onto a metallic base alloy, a lowfriction matrix that unites favourable tribological properties with the load carrying properties and thermal conductivity of metals is obtained. The use of solid lubricants in the plastic matrix makes it possible to use Permaglide® bearings in applications without oil- and grease lubrication.
Depending upon customer requirements and specific applications, a number of maintenance-free and lowmaintenance materials are available with identical microstructure. A porous bronze sinter structure applied to a steel or bronze back and is impregnated with the respective plastic mix. The solid lubricant produces a film between the sliding surfaces. It attributes to low-noise operation at constant speeds and low coefficients of friction throughout the entire service life of the component. This is achieved by means of a mixture of PTFE (Poly Tetra Fluoro Ethylene) with wear-retardant and thermally conductive additives.
It is not possible to find the desired solution for plain bearing applications with products made of maintenance-free materials for all duties and applications. For such duties and applications, low-maintenance materials are available. In this case, the sliding surface
taking up the wear load is formulated from a PVDF (Polyvinylidene Fluoride) matrix.
To reduce the coefficient of friction and improve thermal conductivity, special additives are mixed into the matrix. In addition, the surface of the sliding layer may optionally be equipped with lube bore relieves to accommodate grease or oil.
Approx. Rs 6,500 / Unit Get Latest Price
|Maximum Sliding Speed||0.4m/S|
Approx. Rs 7,500 / Unit Get Latest Price
|Heat Resistance||400-500 Degree C|
We import Carbon self-lubricating bearings and bushings are available in material grades selected to meet the specified service requirements. We provide standard replacement styles as well as custom-designed parts for specific operating problems. Parts range from simple sleeve bushings to more complex styles incorporating notches, grooves or metal reinforcing sleeves.
Carbon/graphite grades selected should be compatible both with the fluids being handled and the operating parameters. The typical materials used are from our Groups A, C, E, and F grades. Group C and Group F grades are used in general purpose applications. Group A grades are resin-impregnated for chemical applications. Group E grades are metal-impregnated for improved heat dissipation, wear and strength characteristics. Depending on the application, various types of metal-impregnated carbon/graphite can be used. For higher operating temperatures, Group B grades with an an oxidation inhibitor are used.
Properties1 Excellent self-lubrication
2 Remarkable chemical corrosion resistance
3 High thermal conductivity and good thermal stability
4 Adequate mechanical strength and shock resistanceApplication:
Resin Impregnated Graphite Parts are widely used in equipments of modern industry, such as seal rings for centrifugal pumps reacting kettle for chemical
engineering, hydraulic generators and rotate baking furnaces; piston rings and bushings for compressors oxygen machines and bellows, bearings for screen motors
and other types of instruments; slides for motors, subways and mine brushes of electrical machinery and slides for trolleybuses, etc
Approx. Rs 7,500 / Piece Get Latest Price
|Minimum Order Quantity||1 Piece|
|Speed Limit||2.0 m/s|
Isostatic Industries, Inc. specializes in Powdered Metal Bronze Bushings Bearings-Sleeves, Flanges, and Washers and More.Since 1982, Isostatic has grown into the leading provider of standard and made-to-order bronze bushings and related bearing products in North America.
Isostatic Industries maintains the largest bronze bearing inventory in the United States and one the largest inventories in the world. With over 25 years in the bronze bearing business Isostatic has produced over 40,000 special bearings. Named after the Isostatic press used to manufacture powdered metal bearings, the company offers a wide variety of products including:
For severe applications, Isostatic also offers oil grooving and graphiting for improved lubricity and life.Here is a list of Products we carry for this Manufacturer:
Isostatic has offered the broadest range of standard size bronze bushings in the industry available from stock including inch and metric, sleeves, flanges, washers, discs, bar and plates at competitive prices.
Isostatic manufactures and distributes bronze and TU bearing products from our facilities in Chicago, Illinois. Centrally located, our expansive distribution facilities in Chicago are ideally situated to reach 75+% of users within1-2 days via express parcel service.