V W Impex
V W Impex
Chandigarh India, Chandigarh
Send E-mail
Call 0804298450196% Response Rate
Home  » Our Products » 

Mounted Units USA Type

We are a leading Exporter of slb bearing, bearing limited, fbj bearings, hyatt roller bearing, mrc bearing and ami bearings from Chandigarh, India.

Get Best Quote

Approx. 5,000 / Piece Get Latest Price

Product Details:
Bearing NumberALL
Number Of RowsSingle Row

The housings are mainly casting housings. There are pressed steel plate housings as well align withease during operation and can be conveniently mounted or dismounted.The bearing units can operate satisfactorily under working conditions, especially for machines operatingin dusty or muddy surroundings. Thus, they are widely used in agricultural, construction and transmissionmachineries, etc..There are various types of sealing devices for our products, such as synthetic rubber seals, slinger withsynthetic rubber seals and triple lip seals etc..Sufficient lubricating grease has been put into the bearings during manufacturing, which can act aslubricating as well as rust proof. No more grease is needed to put in during the lubricating periodwhen the bearings operate under normal conditions. Lubricating grease can be added from the fittingswhen the relubricate bearings operate under hard conditions.The outer ring of the bearing has spherical outside surface which can be fitted to the concave sphericalsurface of the housing, and the fit between them can be clearance fit or interference fit according todifferent conditions. This combination provides self-alignment between the self-contained bearing andthe housing, and compensates for a certain alignment errors or flexing of the shaft when the bearing is inoperation. This definitely increases the bearing service life.

Yes! I am Interested

Get Best Quote

Approx. 5,000 / Peices Get Latest Price

Product Details:
BrandBearing Limited
Type of BearingAll Type Of Bearings
DimensionMin- max
Part NumberAll

Since 1947, Bearings Limited has been dedicated to providing bearing and power transmission distributors with high quality products, competitive pricing and a level of service unmatched in the industry.

  • Ball Bearings

Bearings Limited offers a wide variety of radial and angular contact ball bearings, as well as linear motion bearings and a complete line of spherical plain bearings (ball bushings). Popular bearing sizes are available in both premium and secondary brands, giving distributors multiple options for filling their customers’ needs – all with a single purchase order.

  • Mounted Units & Inserts

Bearings Limited manufactories a complete line of TRITAN ball bearing pillow blocks, flanges and take-up units. All come in a wide variety of configurations and materials, including cast iron, ductile iron, stainless steel, thermoplastic and nickel-plated. Also available are roller bearing split housings (plummer blocks) with adapters.

  • Power Transmission (Chain, Sprockets, Bushings Sheaves/Pulleys & Gears)

Bearings Limited is proud to produce TRITAN Power Transmission Products. TRITAN produces world class power transmission products using select alloy steel, advanced quality control and testing systems to ensure the highest quality.

  • Roller Bearings

An extensive selection of roller bearings are available including spherical roller bearings, cylindrical roller bearings, needle bearings and tapered roller bearings. Popular sizes are supplied in both premium & secondary brands.


Yes! I am Interested

Get Best Quote

Approx. 5,000 / Piece Get Latest Price

Product Details:
Minimum Order Quantity25 Piece
Type of BearingAll Type Of Bearings
DimensionMin- max
Part NumberAll

Japanese bearing manufacturer FBJ-International located in Osaka, Japan is one of the largest and up-to-date businesses of universal importance. The company fills the global bearing market with high-quality output more than 50 years.

Modern technologies of bearing design and production allowed the company optimizing costs and achieving quality parameters at the level of best world analogues, the pricing being exclusively competitive. The company has produced and implemented quality management system. The products are certified according to both Japanese quality standard and ISO: 9001, as well as IQnet and GOST R standards.

FBJ is an organisation that capitalizes on 50 years accumulation of technology and know-how in the ball and roller bearings industry. FBJ Bearings support the Automotive, Industrial and Agricultural market providing superior and quality products with the most competitive pricing.


  •     4 Point Angular Contact Ball Bearings
  •     Agricultural Bearings
  •     Angular Contact Ball Bearings
  •     Angular Contact Ball Bearings - Double Row
  •     Deep Groove Ball Bearings
  •     Deep Groove Ball Bearings - Double Row
  •     Deep Groove Ball Bearings - Heavy Duty
  •     Deep Groove Ball Bearings - Inches
  •     Deep Groove Ball Bearings - Round Outer Ring
  •     Deep Groove Ball Bearings - Stainless Steel
  •     Linear Motion Bearings
  •     Miniature Bearings
  •     Self Aligning Ball Bearings
  •     Thrust Ball Bearings
  •     Thrust Ball Bearings - Inches
  •     Bearing Inserts
  •     Pillow Block Unit - Clean Series
  •     Pillow Block Unit - Heavy Duty
  •     Pillow Block Unit - Housing
  •     Pillow Block Unit - Standard Duty
  •     Pillow Block Unit - Termo Plastic Housing + SS Insert
  •     Plummer Block Housing
  •     Plummer Block Housing - Locating Rings
  •     Stainless Steel Bearing Unit
  •     Stainless Steel Housing
  •     Stainless Steel Inserts
  •     Cylindrical Roller Bearings
  •     Cylindrical Roller Bearings - Full Complement
  •     Needle Roller Bearings
  •     Needle Roller Bearings - Roller Clutch
  •     Spherical Plain Brg
  •     Spherical Roller Bearings
  •     Spherical Roller Thurst Bearings
  •     Tapered Roller Bearings - Inches
  •     Tappered Roller Bearing
  •     Track Runner Bearings
  •     Track Runner Bearings / Roller Follower



Yes! I am Interested

Get Best Quote

Approx. 45,000 / Unit Get Latest Price

Product Details:
MaterialSatinless Steel
TypeRoller Bearing
Bore Size31.75 mm
Outside Diameter44.45 mm

Hyatt Roller Bearing Company was a manufacturer of roller bearings from 1892 to 1916, when it was acquired by General Motors. It continued as a distinct division of GM for many years. The company struggled at first, then entered a phase of profitable growth under the leadership of Alfred P. Sloan (later president of General Motors). The innovative design of Hyatt's roller bearings made them more durable and efficient than others. They were widely used in early automobiles by various manufacturers, and in industrial vehicles and equipment.

Yes! I am Interested

Get Best Quote

Approx. 9,500 / Unit Get Latest Price

Product Details:
MaterialBearing Steel
Weight0.034 kg

MRC products offer unique solutions to application challenges - hard-to-find solutions that are often unavailable from any other supplier. MRC specialty bearings and housings are available right off the shelf as "drop-in" replacements, ready for work within a variety of machines - everything from gearboxes, pumps and electric motors to auxiliary power units, conveyors and more. MRC products are helping plants across a range of industries operate more productively and profitably.

Products include Deep Grove Bearings, Self-Aligning Ball Bearings, Angular Contact Bearings, Precision Bearings, Hybrid Ceramic Ball Bearings, and Specialty Bearings.

Yes! I am Interested

Get Best Quote

Approx. 14,000 / Unit Get Latest Price

Product Details:
Bore Size1/2" to 2"

AMI Bearings, Inc., an Asahi Company, was established in 1990. Specializing in mounted bearings, AMI works toward meeting requirements of any application. It manufactures standard as well as custom mounted bearings. AMI Bearings finds application in many industries—especially in packaging and food industry. Lately, it has emerged as a leading supplier of mounted bearings in the United States.

AMI Bearings has a dedicated working team that strives for customer satisfaction. AMI Bearings believes in providing state-of-the-art services to its customer. It also provides CAD drawings for its customers in a variety of industries. Part of the reason for AMI’s quick success is its personal relationships with distributors, suppliers, customers, and employees. AMI’s working team is always ready for any new challenges.

AMI Bearings is headquartered in Mt. Prospect, Illinois, while its distribution centers are located throughout the United States and some parts of Canada.

AMI Mounted Bearings

Series highlights

  • Inch and Metric bores available
  • Interchangeability with major manufacturers
  • Modifications Available
  • Conform to ABMA, JIS & ISO Standards
  • Silver Series (10mm to 35mm)
  • Normal (1/2" to 3 1/2" and 12mm to 90mm)
  • Medium (1" to 4" and 25mm to 100mm)
  • Heavy (1" to 4 7/16" and 25mm to 140mm)

AMI Accu-Loc

Series highlights

  • Inch & Metric (hard or soft)
  • Honed races
  • Cylindrical OD ("SUE200")
  • Spherical OD ("UE200")
  • Adapter inserts
  • Buna-N seals
  • Drop in replacement for Seal Master-Skwezloc
  • Kanigen ("MZ20"), non-electrolytic nickel chromium - Designed for high washdown
  • Black oxide - standard

AMI Free Spinning Inserts
Series highlights
Available for most inserts - Inch & Metric Interchangeable with major manufacturers Low starting & running torque Low viscosity oil or grease Complete non-contact seals No seal friction for low torque Ideal for packaging, printing machinery, In line systems and conveyor equipment

AMI High Temperature Mounted Bearings

Series highlights
All housing styles availableC4HR5 (maximum 400°F)C4HR23 (maximum 450°F)Special order units (up to 750°F)C4 internal clearance Silicone seals Zinc anodized slingers Steel cages High temperature lubricants Fixed & Float (expansion)

AMI Corrosion Resistant Mounted Bearings
Series highlights
Inch and Metric bores available Interchangeable with major manufacturers Meets HACCP requirements/FDA Approved Materials Relube or NEW Relube Free ("RF")Seamless stainless bushings (Thermoplastic)Zinc Plated and Stainless Steel available (Black Oxide, Thin Dense Chrome, and Kanigen made-to-order/special order)Stainless and Zinc (1/2" to 2 3/16" and 12mm to 50mm)Stainless "ER" Adapter Bearings (5/8" to 1 1/2")Larger sizes available upon request

AMI Shur-Seal Mounted Bearings
Series highlights
Inch and Metric bores available Keep lubricants in & contaminants out Spring loaded back seal Open & Closed end bearing cap Open End Caps Have Spring Loaded Shaft Seals Designed to Retrofit Existing Applications and 12mm to 50mmIdeal for HACCP monitored facilities, Food Processing, Wastewater Treatment, Packaging &Material Handling, Wood, Paper, Pulp and Gypsum & Particle Board

Yes! I am Interested

Get Best Quote

Approx. 45,000 / Unit Get Latest Price

Product Details:
Minimum Order Quantity2 Unit
MaterialStainless Steel

Cooper offers a wide variety of housing options to suit specific bearing types. These encompass housings for cylindrical roller bearings, housings for tapered roller bearings and housings for other bearings, and accommodate a multitude of specific applications and arrangements.

Most styles of Cooper housing are available in cast iron, ductile iron or steel. Special types of housing, alternative materials and housings to special dimensions are available on request.


Pedestals (also called pillow blocks) are the most common mountings for Cooper bearings. Detailed design and the number of fixing bolts varies with the bearing series and size. This includes 2-bolt, 4-bolt, and large-bore options. Cooper offers pedestal ranges that allow direct replacement of SN, SD, and SAF pillow block units. This includes the SD compatible 08SDC heavy duty bearing pedestal and a modification of the standard pedestal - known as Z-line - for Marine applications.


The second most popular housing option is the flange which is usually round or square. Special modifications (e.g. flat or bulkhead seal flange) are also available on request.

Additionally, take-up units are available as either tension type or push type. And Rod-end units are offered as shoe type or tee type.

There is also a selection of hanger mountings to choose from, including double-boss and triple-boss arrangements in addition to the standard single-boss hanger.

Special housings

Finally there are special housings, for example the water-cooled housing, designed primarily for use in steel mill continuous casters. The low profile housing is either cast or fabricated steel.

Beyond this, Cooper can design and supply bespoke housings to suit almost any possible application,

Cooper splt Bearing
Assembly and disassembly of the totally split to the shaft Cooper bearings is easy by the unique design. It is not necessary to disassemble other machine parts such as couplings, gearboxes etc. Costly downtime and repair time can be reduced to the minimum.

Cooper Tapered roller bearing

Beside roller bearings Cooper also supplies tapered roller bearings. These can absorb both axial and radial forces.



Yes! I am Interested

Get Best Quote

Approx. 4,500 / Piece Get Latest Price

Product Details:
Minimum Order Quantity2 Piece
MaterialStainless Steel
Outer Dimension22-210 mm

PEER Bearings Find your part number on the manufacturer site, then search that number in our catalog using the search bar above.

PEER manufactures a full line of agricultural, radial, mounted unit ball bearings and tapered roller bearings. PEER manufactures their products in TS- 16949 certified factories they own and control and have flexible capabilities that allow for low to high volume production. PEER Bearing, initially called Archer Bearing was founded in 1943 in Illinois.

PEER Product Lines are divided into Radial Ball Bearings, Agriculture Bearings, Mounted Units, Tapered Bearings, and Oil Bath & Shaft Seals.
PEER Radial Ball Bearings

PEER manufactures a full range of inch and metric radial ball bearings for the global Automotive, Industrial and Distribution markets. PEER''s Radial ball bearing product line includes: single row deep groove ball bearings (DGBB); miniature precision single row deep groove ball bearings (Mini DGBB); and double row angular contact ball bearings (DRACBB).

PEER Double Row Angular Contact Ball Bearings

5200 Series
5300 Series
W5200 Series
W5300 Series

Miniature Precision Single Row Deep Groove Ball Bearings


Additional PEER Bearing Product Lines:Mast Guide Ball Bearings

Specially designed bearings to handle mast movements of industrial trucks. This series will handle heavy radial and shock loads. Thick outer rings permit heavy OD loading. Specially designed seals allow the bearings to operate in extreme environments.
Thrust Ball Bearings

PEER thrust ball bearings are available in both the single and double direction designs. Either one can take high axial load but no radial load. Besides the conventional design with flat supporting surfaces, the standard includes thrust ball bearings made with spherical housing washers and seating rings.
Collar / Flangette Ball BearingsSelf Aligning Ball Bearings

The PEER self-aligning ball bearing is one of the double row type with a spherical raceway in the outer ring. This gives the bearing self-aligning properties and allows it to compensate for misalignment, shaft deflections and housing deformation. Self-aligning ball bearings are available with cylindrical or tapered bore 1:12.
Single Row Angular Contact Ball Bearings

The PEER Bearing 7200 series is a light duty series used in applications that call for thrust or combination thrust and radial loads. Standard production is made with 40° contact angle. This series is available with various contact angles. Retainers can be made of various materials: bronze, brass or non-metalic. Duplex pairing is available as well.

PEER AgXtreme™ Bearings

These severe environment bearings were developed by PEER for harsh and severe environments. The AST (Advanced Seal Technology) was designed for environments where a standard seal is not durable or rugged enough.
TillXtreme™ Maintenance Free Tillage Units

These maintenance free bearing units were recently developed by PEER for use on gang mounted disc tillage equipment. Currently, frequent relubrication of tillage bearings is necessary to maintain proper bearing function. The time spent relubricating bearings on a disc tillage implement results in lost time in the field and reduced productivity.
PEER Mounted Units

PEER Mounted Units offer a full range of features and styles to meet the needs of a variety of applications (including HVAC, severe contamination and agriculture). Some of their selling points include:
PEER Tapered Roller Bearings

PEER Bearing Company manufactures a
PEER Oil Bath & Shaft Seals

Yes! I am Interested

Get Best Quote

Approx. 35,000 / Piece Get Latest Price

Product Details:
Minimum Order Quantity2 Piece
MaterialBearing Steel
TypeRoller Bearing

Revolvo Split Roller Bearings (SRBs) Fully split to the shaft Housed Cylindrical Roller Bearings with brass cages, perfect for trapped applications, where surrounding equipment would have to be removed (couplings, motors, gearboxes etc.) to fit a normal bearing.

Bearing range comparison
Revolvo Split Roller Bearings offer a range of bearing series, providing solutions for a wide range of operating conditions. 01 Light, 02 Medium and 03 Heavy Series accommodate increasingly higher static and dynamic loads.

03 Heavy Series Split Roller Bearing
A more specialised heavy duty series used in the most heavily loaded applications, generally operating at relatively low speed.

02 Medium Series Split Roller Bearing
An increased section on the 01 Light Series offers additional load-carrying capacity. This series is typically used in arduous, heavily loaded applications where shock loads and vibration may be present.

01 Light Series Split Roller Bearing
The most commonly supplied series, offering a good combination of load and speed capabilities, with the smallest cross section within the range.

Split Roller Bearing TypesRetained Type Bearing (BR)
This bearing has integral lips on the outer race, to provide a surface for axial load. The axial load is accommodated on the inner race via the hardened clamp rings, which both align the inner race halves and provide roller guidance. In larger bearings the inner race is manufactured with integral ribs for roller guidance and axial load.

This type of bearing will locate the shaft axially as well as providing a means for taking axial load. The retained outer race must be located sideways against one of the housing's grooved shoulders, using the pins and screws provided. Only one retained unit should be mounted on any particular shaft. Additional care should be taken when mounting split roller bearing units on shafts using other, non-split types of bearings (ball, cylindrical, spherical or taper roller etc.) to ensure there are no other locating bearings used.

Expansion Type Bearing (BX)
This bearing is designed for radial loads only. As in the retained type bearing, the rollers are guided on the inner race by the hardened shoulders of the clamping rings.

During expansion or contraction of the shaft rollers are free to move across the plain outer race, offering virtually no resistance to axial movement. Limits for the amount of axial movement are given in the assembly and maintenance section.


The compact Split Plummer Block Bearing from Revolvo is the first split cylindrical roller bearing assembly to be interchangeable with standard SNL/SN/SD/SAF series Plummer Blocks - bringing the benefits of a split design to a much wider audience.

Complete range of SRB Plummer Block Housing

Cast iron Plummer Blocks accommodating adaptor sleeve-mounted solid spherical roller bearings are amongst the most common types in use, supporting rotating shafts in everything from conveyors and fans to line shafts. Yet their replacement is often time-consuming and difficult, due to the need to remove adjacent equipment.

Replacing a typical bearing mounted in a cast iron Plummer Block may take anything from hours to several days. In contrast, it may take as few as 1-2 hours to replace an Revolvo split bearing unit.

  • Dimensionally interchangeable with SNL/SN/SD and SAFseries Plummer Blocks. Dramatically reduced downtime for maintenance and replacement. Costs, complexity and time are significantly reduced from that of the standard Plummer Block with solid bearing

Yes! I am Interested

Get Best Quote

Approx. 5,000 / Piece Get Latest Price

Product Details:
Minimum Order Quantity25 Piece
BrandIJK Bearing

IJK® (Inoue Jikuuke Kogyo) has been producing many standard and special types of ball bearings as a professional manufacturer since 1938.  As an authorized IJK distributor, AST® Bearings stocks their products receiving them directly from the factory.  Feel free to contact us about the IJK bearing products we supply.

IJK activities have been devoted to the manufacture of high quality Ball Bearings under the foundation of the advanced technology and the latest equipment in order to achieve superior production lines. This is especially true for their Super Precision Angular Contact Ball Bearings which are manufactured on the latest automated lines under the skilled eyes of engineers who've gained the high reputation and the strong trust of customers world-wide.

IJK has various product groups specializing in producing the highest possible quality bearings to various industries. Specialized products are also available for production to meet the ever-changing needs of the users. IJK ball bearing products include among other products the following:

IJK Products Range

  •     Deep Groove Ball Bearings
  •     Large Bore, Extra Thin Bearings
  •     Felt Seal Ball Bearings
  •     Magneto Bearings
  •     Self-Aligning Ball Bearings
  •     Double Row Angular Contact Ball Bearings

Angular Ball Bearings and Other Products from IJK.

    A large portion of production is dedicated for a large Japanese Ball Bearing company.
    In addition to the standard sizes mentioned, IJK offers a wide variety of special bearing products and welcomes your special requirements.
    Manufactures up to 75mm OD.
    High quality bearings for precision motors meet the various needs of well-known electric appliance manufacturers.
    386 Employees across three locations, and two production facilities.

 Series Highlights

  •     Miniature ball bearings
  1.     1200, 1300, 2200, 2300 (Self-Aligning Ball bearings)
  2.     5200, 5300 (Double Row Angular Contact Ball bearings)
  3.     7000, 7200 (Angular Contact Ball bearings)
  4.     KP-KSP, DPP, DW-DSP, 500, and P (Aircraft Series bearings)
  5.     61700, 61800, 61900 (Thin Radial Ball bearings)
  •     R (Inch Series)
  1.     8000 & 87000 (extended inner ring)
  2.     WC8000 & WC87000 (ND type - wide cup), and 88000 (extended inner ring) type bearings
  • IJK Special Products
  1.     Housing Type Ball Bearings
  2.     Carrier Roll Bearings
  3.     Special Hole Type
  4.     Power Transmission
  5.     Drive Roll Bearings
  6.     Idler Bearings
  7.     Angular Contact for Steering Units

Yes! I am Interested

Get Best Quote

Approx. 5,000 / Piece Get Latest Price

Product Details:

uniball bearings produces the industry widest range of  rod end

in 2000, rbc acquired schaublin sa based in delémont, switzerland. As a result, rbc added schaublin’s metric rod ends and metric spherical bearings to the family of global rbc products, and a base with which to service the european market. Within this 140,000 sq. Ft. Facility, rbc has established the company’s european distribution center. In addition, schaublin was licensed by heim® bearings to market unibal® rod ends back in the 1950s.

following unibal rod end:

  • unibal aircraft series female rod end

unibal aircraft series female (hf-m)
part #: hf-m-series

  • unibal aircraft series female self lubricating rod ends

unibal aircraft series - female self lubricating rod end. (hfr-m series)

part #: hfr-m-series

  • unibal special purpose series rod end - male

part #: m-m-series

  • unibal special purpose series rod end - female

uniball special purpose series female (f-m)
part #: f-m-series

  • unibal aircraft series male rod end hm-m

unibal aircraft series (hm-m)
part #: hm-m series

  • unibal - narrow series plain and grooved outer member

unibal ms spherical series - self lubricating, narrow series (nnrg, nnr) ms14101 and ms14104
part #: nrrg-nrr-series

  • unibal - wide series plain and grooved outer member

unibal ms spherical wide series - plain and grooved outer member (wrrg,wrr) ms14103 & ms14102
part #: wrrg-wrr-series

  • precision series male rod end

precision series male rod end 4 piece - metal to metal
part #: hm-series

  • precision series female rod end

precision series female rod end 4 piece - metal to metal
part #: hf-series

  • metric precision series female rod end

metric precision series female rod end 4 piece - metal to metal
part #: sf-series

  • metric precision series male rod end

metric precision series male rod end 4 piece - metal to metal
part #: sm-series

  • precision special purpose series

precision special purpose series 4 piece - metal to metal
part #: uniball-series

  • rep series - male thread

rep series - male thread ms21151
part #: rep-male

  • rep series - female thread

rep series - female thread ms21153

part #: rep-female

  • rep series hollow & solid shank

rep series hollow & solid shank ms21152 - ms21150
part #: rep-hollow-solid

  • ra-rr series + ra-rr hollow series

ra-rr series
part #: ra-rr



Yes! I am Interested

Get Best Quote

Approx. 4,000 / Piece Get Latest Price

Product Details:
Type of BearingUHMW Insert Bearing
Bearing Number201-208
Usage/ApplicationSubmerged in Water:

Pillow Blocks from PBT, a glass filled reinforced engineering polymer, that will never corrode or rust. When inserted with a  UHMW insert sleeve bearing, they provide superior corrosion resistance compared to any mounted unit offered today. BLOCK CONSTRUCTION:Blocks are molded from a high grade glass-filled PBT polymer. The block’s spherical bore is machined for concentricity and proper fit of the insert bearing. The last step in manufacturing is machining the solid base for flatness.SLEEVE BEARING CONSTRUCTION:UHMW produces insert sleeve type bearings made from UHMW-PE plastic.  They are CNC machined from an extruded rod for superior mechanical performance and longer life. This type of bearing is intended primarily to reduce friction and permit free movement of turning parts. They are best suited for light to moderate loads and low speeds.MATERIALS:BLOCKS: Glass-filled PBT polymerSLEEVE BEARINGS: UHMW-PE (Ultra High Molecular Weight Polyethylene)TEMPERATURE:Minimum temperature: -31°F; Maximum in Air: 180°F; Submerged in Water: 120°F

Yes! I am Interested

Get Best Quote

Approx. 5,000 / Piece Get Latest Price

Product Details:
Type of BearingAll Type Of Bearings
Bearing NumberAll
DimensionMin- max

The JAF brand traces it roots to 1946 when the Fujino Iron Works, Co. Ltd, was founded in Japan.  Today, it is a masterful producer of ball bearing products.  
Through its superior technical capability and a flexible manufacturing system capable of handling multiple-type, small-lot requirements, JAF special ball bearings are manufactured to meet specific customer needs.  The factory designs products made from high-carbon chrome bearing steel and other special steel materials (such as chrome molybdenum steel and stainless steel) to meet particular application requirements and can manufacture high-precision bearings with a variety of inner diameter configurations-such as square, hexagonal, or oval-or with outer diameter grooves that are, for example, U-shaped, V-shaped, or W-shaped.

JAF ball bearing products include among other products the following:

  1.   Single Row Ball Bearings
  2.   Double Row Ball Bearings
  3.   Felt Seal Type Ball Bearings
  4.   Track Rollers
  5.   Clutch Release Ball Bearings
  6.   Spherical Outside Ring Ball Bearings
  7.   Cylindrical Outer Ring Ball Bearings
  8.   Triple Seal Ball Bearings
  9.   Square Bore Ball Bearings
  10.   Insert Ball Bearings
  11.   Special Ball Bearings
  • Double row Bearings and Other Products from JAF
  1.  A large portion of production is dedicated for a large Japanese Ball Bearing company.
  2. In addition to the standard sizes mentioned, JAF offers a wide variety of special bearing products and welcomes your special requirements, including felt ball bearings and track roller ball bearings.
  3. Manufactures up to 55mm OD.
  4. JAF manufactures parts in chrome steel, along with offering options on stainless steel materials.
  5. Modifications to ID and OD are available from JAF.

Series Highlights
•    WE6000, WE6200, WE6300, W200,W300 (Single Row Ball bearings).
•    5200, 5300, W5200-2RS, W5300-2RS (Double Row Ball bearings).
•    2200-2RS, RL, 1200, 11200, 120 aka I-71200 (Self-Aligning Ball bearings).
•    75E, 76E, EE aka R Series, 77R, 99R, RLS, RMS (Inch Series Single Row Ball bearings).
•    88000, 87000, WC88000, WC87000 (Metric Felt Series Ball bearings).
•    LD200-2RS, LD5700ZZ, LD5800ZZ (Track Roller Type bearings).
•    SH200, SR200 (Uni-flange Ball Bearings).
•    RA200, RA100 (Spherical OD Inch Ball bearings).
•    ER100 with snap ring (Cylindrical OD Metric Ball bearings).
•    Stainless Steel Ball bearings.
•    Special Type Ball bearings.


Yes! I am Interested

Get Best Quote

Approx. 30,000 / Unit Get Latest Price

Product Details:
MaterialCast Iron
Outer DimensionMedium and Large(110-190mm

Blue Brute Pillow Block Bearings spherical roller bearing (SRB) solid-block housed units are designed for the most challenging circumstances. Made with cast-steel housings and Blue Brute® Pillow Block Bearings high-performance SRBs, these are the only spherical roller bearing housed units to offer steel solid-block housing as standard. In addition, Blue Brute Pillow Block Bearings SRB solid-block housed units can run efficiently on misaligned shafts up to ±1.5 degrees, without a reduction in life expectancy.

With a full line of precision-made locking styles and housings, these solid-block housed units offer protection from contaminants, particularly when used with the many available advanced primary and secondary seal options. Steel auxiliary covers are also available to create another layer of protection from harsh conditions.

Yes! I am Interested

Get Best Quote

Approx. 450 / Piece Get Latest Price

Product Details:

We are importing Consolidated bearing from USA which has been providing a wide variety of quality bearing products since 1932.

Major product categories carried by Consolidated are:

Deep Groove Ball Bearings, Self-Aligning Ball Bearings, Magneto, Angular Contact, Double Row Ball Bearings, Cylindrical Roller Bearings, Needle Bearings, Spherical and Roller Thrust Bearings, Tapered Roller Bearings, Thrust Bearings, Pillow Blocks and Bearing Inserts, Adapters, Withdrawal Sleeves, Locknuts and Lockwashers, Oil Seals, Linear Recirculating Bearings, Rod Ends, Journal Roller Assemblies and Spherical Plain Bearings.

Yes! I am Interested

Get Best Quote

Approx. 35,600 / Unit Get Latest Price

Product Details:
MaterialStainless Steel
CageWith Roller

Craft Split Bearing Co is a Virginia-based manufacturer of split cylindrical roller bearings and a recognized leader in split bearing technology. The great advantage of a split bearing is its ease of replacement in the event of a bearing failure. Because the bearing is split down the shaft so that all components, even the sels, can be easily replaced, the task of replacing a bearing becomes a minor one.

The Craft Split Bearing is not only durable and rugged but contains many innovative features for which Craft has received patents. For example, all of the Craft pillow block bearings have a standard base-to-center height (although custom, metric, and large-bore bearings are also available).

Features of the Craft Split Bearing Pillow Block (Housing Cap)

Houses either an expansion (FL) or non-expansion bearing (HD). Inside diameter is spherically machined to accept the cartridge assembly, allowing the pillow block to compensate for misalignment up to 3%. Base-to-center height meets industry standards.


The spherically machined cartridge takes initial shaft misalignment externally, allowing the bearing and seals to remain parallel to the shaft at all times. Each cartridge comes drilled, tapped, and plugged in its lower half so that lubricant can be purged.

Outer Race

Made of 52100 steel, hardened to a Rockwell COF 59/62. The outer race joints are cut in a chevron so that the roller is carried across the split. The outer race comes in either a FLOAT (FL) or HELD (HD) type.

Aluminum Triple Labyrinth Seals

Craft's triple-labyrinth seals, unlike felt or lip type seals, rotate with the shaft eliminating and chance of shaft wear caused by the seal.

Inner Race

Made of 52100 steel, hardened to a Rockwell C 59/62. The split of the inner race is cut at a precise angle so that when the rollers cross the split they are carried across, having only point contact with the split.

Clamp Collars

Made of 4142 alloy and thru hardened rather than flame hardened. The inside lips of the clamp collars form the running track of the rollers and act as guides for the rollers. The Clamp Collars also assist the HD (Held) bearings in accepting axial loads.

Pillow Block Pedestal Housing

Like the cartridge, the split pedestal housing is made of high-quality, strong ductile iron and can be easily disassembled (by removing two bolts) for bearing replacement.




Yes! I am Interested

Get Best Quote

Approx. 25,000 / Unit Get Latest Price

Product Details:
Bore Size260 - 460 mm
MaterialStainless Steel
TypeRollway Bearing

Rollway® Bearing, a subsidiary of Emerson Power Transmission Solutions USA, has been a pioneer in the ball and roller bearing industry since 1908. Through the input of Emerson, which acquired Rollway® in 1996,
PRODUCTSThe product line consists of small to very large size standard ball and roller bearings as well as high precision aircraft bearings. The Rollway® brand name can be found in all kind of applications, ranging from small hand tools to heavy machinery. Steel, paper, cement, agriculture, gearing are only a few of the industries which are relying on Rollway® bearings.

Rollway has been manufacturing bearings for over 100 years, as National distributors, Australian Bearings carries a large range of both European and American Rollway stock.

  • High Precision Aircraft Bearings
  • Stainless Steel Deep Groove Ball Bearings
  • Single Row Deep Groove Ball Bearings
  • Single Row Angular Contact Ball Bearings
  • Double Row Self Aligning Ball Bearings
  • Single Acting Thrust Ball Bearings
  • Spherical Roller Bearings
  • Single Row Tapered Roller Bearings
  • Single Row Cylindrical Roller Bearings

Yes! I am Interested


Corporate Brochure

Explore More Products


Send SMS
Vinay Wahi  (Proprietor)
V W Impex
SCF 503,2nd Floor Motor Market, Manimajra
Chandigarh India, Chandigarh - 160101 , India
Send E-mail
Share Us: