Bearing Units & Housings

Product Details:

SKF ConCentra roller bearing units are part of SKF’s commitment to the “Total Shaft Solutions” programme that provides a wide assortment of innovative bearing products to the air handling, conveyor equipment, fluid machinery, agricultural and forestry industries. SKF ConCentra roller bearing units, with their true concentric locking mechanism, are friction assemblies that provide optimum performance in applications where there is a need for easy bearing unit replacement and minimal maintenance. There is no comparable bearing unit available on the market that can be mounted or dismounted as quickly and as accurately as the SKF ConCentra technology allows. Where bearing units with eccentric locking technology had been used before, SKF ConCentra roller bearing units provide superior performance.

Types of mounted bearing solutions

The SKF assortment comprises four main types of mounted bearing solutions:

• Ball bearing units 
• Roller bearing units 
• Housings with bearings
• Split bearing units

 

SKF ConCentra Roller Bearing Units

SKF ConCentra roller bearing units are robust, ready-to-mount bearing units that are assembled, lubricated and sealed at the factory for maximum service life. When compared to sleeve-mounted bearing units in split housings, SKF ConCentra roller bearing units provide a number of advantages including:

• longer service life

• higher operational reliability

• quicker mounting

• minimal maintenance

• simplified replacement

The housings SKF ConCentra roller bearing units are available in two housing series:

• a non-split plummer block housing in the SYNT series

• a flanged housing in the FYNT series Plummer block housings in the SYNT series have a stiff design that helps the housing to retain its form. These non-split, grey cast iron housings have the same excellent heat conducting properties and strength as comparably sized SKF split SNL plummer block housings.

• SYNT 40 FTS

Pillow (plummer) block roller bearing units and take-up roller bearing units consist of a spherical or tapered roller bearing mounted in a non-split housing that can be bolted to a support surface. This variant has a spherical roller bearing, a two-bolt base and SKF ConCentra locking, creating a true concentric tight fit, and setting the correct internal clearance within the bearing. The units are sealed and lubricated and ready to use. This bearing unit covers a wide range of requirements, in metric dimensions.

• SYNT 40 FTS
• SYNT 40 LTS
• SYNT 35 F
• SYNT 35 FTF

• FYNT 35 F

Triangular flanged roller bearing units consist of a spherical roller bearing mounted in a cast iron housing that can be bolted to a machine wall. They are robust, ready-to-mount units that are assembled, lubricated and sealed at the factory for maximum service life. The simple installation, easy alignment and reliable locking technology of SKF ConCentra units contribute to a smooth operation.

• FYNT 35 L

 
In addition to the SKF ConCentra roller bearing units, the comprehensive SKF assortment includes other ready-to-mount bearing units such as:

• inch size SKF ConCentra roller bearing units

• collar mounted roller bearing units

• SKF ConCentra ball bearing units

• Y-bearing units

Product Details:

HFB is one of the leading manufacturers of bearing housings and drive components for a wide variety of applications. At its site in Buchen, Germany HFB manufactures on a production area of over 5,800 m² housing units with a swing of 2,000 mm for numerous customers in the field of conveying technology and plant engineering. The intention of HFB is to provide a full-service package including housings, bearings, sleeves and all component parts.
Flanged Bearing and Plummer Block Housings

722500 – Flanged Bearing Housings
For the assembly of cylindrical self-aligning ball bearing and spherical roller bearing
For shaft diameters from 20 to 100 mm
Felt seal
Relubricatable

TVN-Plummer Block Housings: Shaft mountings at mine cars
Unsplit Plummer Block Housings
For using of cylindrical self-aligning ball bearings and spherical roller bearings
For shaft diameters from 20 to 75 mm
Felt seal
Relubricatable

Plummer Block- and Take-Up Housings for the conveyor industry

STL: Drum Take-up Bearings
BTL: Plummer Block Housings
Unsplit housings for spherical roller bearings of the series 222, 230, 231 and 232. The Housings are manufactured out of cast steel GS 45. These housings are manufactured for located or floating bearings. They have double labyrinth seals at both ends and are designed for grease lubrication.
Special version: possible with taconite seal

SLG: Drum Take-up Bearings

Plummer Block Housings made of grey cast iron, ductile iron and cast steel SNI: Plummer Block Housings
SSNI 5: Plummer Block Housings

SNI 5.. and SNI 6.. are split bearing housings for the fitting of self aligning ball or spherical roller bearings with an adapter sleeve.
SNI 2.. und SNI 3.. for the fitting of self aligning ball or spherical roller bearings with a cylindrical bore.
SNI are designed for grease lubrication only and can be supplied with lubrication holes if required.

Product Details:

Waterproof housing :
The waterproof sealing system guarantees protection of the bearing from the external environment. Could be mounted with chrome steel insert bearings for low budget and economic application.

Special Characteristics :
Corrosion resistance,Resistance to food &liquid contaminants adapt to frequent washdowns and low weight element helps to meet your particular engineering demands.

Insert Bearings :
To be assembled with chrome steel or stainless steel insert bearings to meet your particular budget and performance needs..

 

Product Details:

Browning^® mounted ball bearings offer multiple housing styles, materials and configurations. This features an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to help prevent outer ring rotation and is available with the following locking mechanisms:

• Setscrew
• Eccentric
• BOA concentric locking collar

The contact seal reduces grease loss while reducing friction. The black oxide treated flinger helps prevent contaminant entry. Together they provide a good balance of protection. Depending on your preference, these bearings are available in both inch and metric units. They also come in a variety of housings. Additionally, industry-specific solutions are available as illustrated on the following pages

Product Details:

Cooper offers a wide variety of housing options to suit specific bearing types. These encompass housings for cylindrical roller bearings, housings for tapered roller bearings and housings for other bearings, and accommodate a multitude of specific applications and arrangements.

Most styles of Cooper housing are available in cast iron, ductile iron or steel. Special types of housing, alternative materials and housings to special dimensions are available on request.

Pedestals:

Pedestals (also called pillow blocks) are the most common mountings for Cooper bearings. Detailed design and the number of fixing bolts varies with the bearing series and size. This includes 2-bolt, 4-bolt, and large-bore options. Cooper offers pedestal ranges that allow direct replacement of SN, SD, and SAF pillow block units. This includes the SD compatible 08SDC heavy duty bearing pedestal and a modification of the standard pedestal - known as Z-line - for Marine applications.

Flanges

The second most popular housing option is the flange which is usually round or square. Special modifications (e.g. flat or bulkhead seal flange) are also available on request.

Additionally, take-up units are available as either tension type or push type. And Rod-end units are offered as shoe type or tee type.

There is also a selection of hanger mountings to choose from, including double-boss and triple-boss arrangements in addition to the standard single-boss hanger.

Special housings

Finally there are special housings, for example the water-cooled housing, designed primarily for use in steel mill continuous casters. The low profile housing is either cast or fabricated steel.

Beyond this, Cooper can design and supply bespoke housings to suit almost any possible application,

Cooper splt Bearing
Assembly and disassembly of the totally split to the shaft Cooper bearings is easy by the unique design. It is not necessary to disassemble other machine parts such as couplings, gearboxes etc. Costly downtime and repair time can be reduced to the minimum.

Cooper Tapered roller bearing

Beside roller bearings Cooper also supplies tapered roller bearings. These can absorb both axial and radial forces.

 

 

Product Details:

PEER Bearings Find your part number on the manufacturer site, then search that number in our catalog using the search bar above.

PEER manufactures a full line of agricultural, radial, mounted unit ball bearings and tapered roller bearings. PEER manufactures their products in TS- 16949 certified factories they own and control and have flexible capabilities that allow for low to high volume production. PEER Bearing, initially called Archer Bearing was founded in 1943 in Illinois.

PEER Product Lines are divided into Radial Ball Bearings, Agriculture Bearings, Mounted Units, Tapered Bearings, and Oil Bath & Shaft Seals.
PEER Radial Ball Bearings

PEER manufactures a full range of inch and metric radial ball bearings for the global Automotive, Industrial and Distribution markets. PEER's Radial ball bearing product line includes: single row deep groove ball bearings (DGBB); miniature precision single row deep groove ball bearings (Mini DGBB); and double row angular contact ball bearings (DRACBB).

PEER Double Row Angular Contact Ball Bearings

5200 Series
5300 Series
W5200 Series
W5300 Series

Miniature Precision Single Row Deep Groove Ball Bearings

R, RF
RI, RIF
L, LF

Additional PEER Bearing Product Lines:Mast Guide Ball Bearings

Specially designed bearings to handle mast movements of industrial trucks. This series will handle heavy radial and shock loads. Thick outer rings permit heavy OD loading. Specially designed seals allow the bearings to operate in extreme environments.
Thrust Ball Bearings

PEER thrust ball bearings are available in both the single and double direction designs. Either one can take high axial load but no radial load. Besides the conventional design with flat supporting surfaces, the standard includes thrust ball bearings made with spherical housing washers and seating rings.
Collar / Flangette Ball BearingsSelf Aligning Ball Bearings

The PEER self-aligning ball bearing is one of the double row type with a spherical raceway in the outer ring. This gives the bearing self-aligning properties and allows it to compensate for misalignment, shaft deflections and housing deformation. Self-aligning ball bearings are available with cylindrical or tapered bore 1:12.
Single Row Angular Contact Ball Bearings

The PEER Bearing 7200 series is a light duty series used in applications that call for thrust or combination thrust and radial loads. Standard production is made with 40° contact angle. This series is available with various contact angles. Retainers can be made of various materials: bronze, brass or non-metalic. Duplex pairing is available as well.

PEER AgXtreme™ Bearings

These severe environment bearings were developed by PEER for harsh and severe environments. The AST (Advanced Seal Technology) was designed for environments where a standard seal is not durable or rugged enough.
TillXtreme™ Maintenance Free Tillage Units

These maintenance free bearing units were recently developed by PEER for use on gang mounted disc tillage equipment. Currently, frequent relubrication of tillage bearings is necessary to maintain proper bearing function. The time spent relubricating bearings on a disc tillage implement results in lost time in the field and reduced productivity.
PEER Mounted Units

PEER Mounted Units offer a full range of features and styles to meet the needs of a variety of applications (including HVAC, severe contamination and agriculture). Some of their selling points include:
PEER Tapered Roller Bearings

PEER Bearing Company manufactures a
PEER Oil Bath & Shaft Seals

Product Details:

FSQ Housing Specializes in the manufacturing of good bearing housings, FSQ is proud on being able to have a quick and reliable response to standard and customized bearing housing solutions. FSQ offer a complete design service to all of its customers who have special requirements.

It Stands for Excellence and Reliability. With consistent endeavour to maintain the highest quality, of its products and services, FSQ gives a concept of quality product does not necessarily be expensive.

The products of FSQ consists of Pillow Blocks, Plummer Blocks (Split Pillow Blocks), Adapter Sleeves and Bushes including a comprehensive selection of ranges.

With solid experience and skilled work force, FSQ have developed long-term good reputation among the following industries:

• Mining
• Cement
• Pulp and paper
• Lifts and cranes
• Steel mills
• Sugar mills
• Furnaces
• Industrial fans
• Quarrying
• Railways
• Waste water treatment
• Metal processing 

FSQ have a wide range of CNC machine tools that can do a variety of operations and aim to have continuous improvement. Their equipment can process diameters up to 1000 mm and allow them to satisfy the needs of their customers for large bearing housings and Adapter sleeves in mining field.

The standard of FSQ bearing housings is made of grey cast iron. Certain housings are also available in spheroidal graphite cast iron (ductile iron) and cast steel if higher strength is required. However, housings in Stainless Steel are also can be supplied.

For applications where housings of greater strength are needed, FSQ manufactures ranges of bearing housings of SSN, SSNK, SSD, SSAF... The bases of these housings are solid and may be drilled for 2 or 4 bolt fixing are required.

 

Product Details:

Revolvo Split Roller Bearings (SRBs) Fully split to the shaft Housed Cylindrical Roller Bearings with brass cages, perfect for trapped applications, where surrounding equipment would have to be removed (couplings, motors, gearboxes etc.) to fit a normal bearing.

Bearing range comparison
Revolvo Split Roller Bearings offer a range of bearing series, providing solutions for a wide range of operating conditions. 01 Light, 02 Medium and 03 Heavy Series accommodate increasingly higher static and dynamic loads.

03 Heavy Series Split Roller Bearing
A more specialised heavy duty series used in the most heavily loaded applications, generally operating at relatively low speed.

02 Medium Series Split Roller Bearing
An increased section on the 01 Light Series offers additional load-carrying capacity. This series is typically used in arduous, heavily loaded applications where shock loads and vibration may be present.

01 Light Series Split Roller Bearing
The most commonly supplied series, offering a good combination of load and speed capabilities, with the smallest cross section within the range.

Split Roller Bearing TypesRetained Type Bearing (BR)
This bearing has integral lips on the outer race, to provide a surface for axial load. The axial load is accommodated on the inner race via the hardened clamp rings, which both align the inner race halves and provide roller guidance. In larger bearings the inner race is manufactured with integral ribs for roller guidance and axial load.

This type of bearing will locate the shaft axially as well as providing a means for taking axial load. The retained outer race must be located sideways against one of the housing's grooved shoulders, using the pins and screws provided. Only one retained unit should be mounted on any particular shaft. Additional care should be taken when mounting split roller bearing units on shafts using other, non-split types of bearings (ball, cylindrical, spherical or taper roller etc.) to ensure there are no other locating bearings used.

Expansion Type Bearing (BX)
This bearing is designed for radial loads only. As in the retained type bearing, the rollers are guided on the inner race by the hardened shoulders of the clamping rings.

During expansion or contraction of the shaft rollers are free to move across the plain outer race, offering virtually no resistance to axial movement. Limits for the amount of axial movement are given in the assembly and maintenance section.

PLUMMER BLOCK HOUSINGS

The compact Split Plummer Block Bearing from Revolvo is the first split cylindrical roller bearing assembly to be interchangeable with standard SNL/SN/SD/SAF series Plummer Blocks - bringing the benefits of a split design to a much wider audience.

Complete range of SRB Plummer Block Housing

Cast iron Plummer Blocks accommodating adaptor sleeve-mounted solid spherical roller bearings are amongst the most common types in use, supporting rotating shafts in everything from conveyors and fans to line shafts. Yet their replacement is often time-consuming and difficult, due to the need to remove adjacent equipment.

Replacing a typical bearing mounted in a cast iron Plummer Block may take anything from hours to several days. In contrast, it may take as few as 1-2 hours to replace an Revolvo split bearing unit.

• Dimensionally interchangeable with SNL/SN/SD and SAFseries Plummer Blocks. Dramatically reduced downtime for maintenance and replacement. Costs, complexity and time are significantly reduced from that of the standard Plummer Block with solid bearing

Product Details:

The VW Impex Chandigarh supply Stainless-Steel Mounted Units for Ball Bearings are made from 100% stainless steel and equipped with a Molded-Oil lubricated insert technology. They provide corrosion resistance and longer lubrication life in a clean unit. As a result reduction in maintenance, downtime and replacement costs are realized.

Stainless-Steel Mounted Unit Bearings are designed to meet all of the most demanding operating environments such as the Food, Beverage or Chemical industry. Stainless Steel is ideally suited for applications that require frequent washdowns, operate near food or liquid contaminants and have a high exposure to harsh chemicals or humidity.

Benefits of Stainless-Steel Mounted Unit Bearings

• Non-Magnetic
• Non-Corrosive
• Hygienic
• Food processing
• Canning
• Bottling
• Pharmaceutical, Medical
• Chemical & Rubber Processing
• Packaging
• Car Washes

Mounted Units Features:

·         304 Stainless Steel solid base housing

·         High tensile strength housing

·         Stainless Steel grease fitting

·         Stainless Steel slinger over a double lip contact seal

·         440C Stainless Steel bearing

Product Details:

Dodge bearings offer innovative designs; a wide range of shaft attachment methods, rolling elements, housings, and seal choices; patented features; and consistent performance. Mounted Ball Bearings When it comes to reliable service and low maintenance, Dodge mounted ball bearings are unmatched in the industry. Dodge mounted ball bearings are available in any of our proven locking devices: our exclusive 65° set screw locking system, eccentric locking collars, D-Lok™ concentric clamp locking system and our patented* GRIP TIGHT® adapter mounted ball bearing.

Mounted Tapered Roller Bearings For decades, industry’s leading producers have depended on our roller bearings to handle their conveyance and power transmission needs. Did you know that Dodge developed the original Type E bearing in the 1940’s? Throughout the years, its reputation for reliability has remained, and from that innovation and engineering a complete family of roller bearings has evolved. Today, our bearings offer innovative designs; a wide range of shaft attachment methods, rolling elements, housings, and seal choices; patented features; and consistent performance.

Plain Bearings Dodge offers plain bearings that are uniquely engineered to provide reliable performance – even in the harshest environments. Ideal for air handling, food processing, waste water, high temperature, and food & beverage applications, they feature patented technologies that reduce maintenance and ensure long service life.

Product Details:

Sealmaster Gold Line Ball Bearings Provide Superlative Performance Across The Spectrum Of Tough Industrial Applications. The reason why these bearings are the "World's most specified" they perform with fewer failures, less downtime, increased productivity and longer life, saving users time and money in a variety of ways. No other commercially marketed bearing combines the exclusive engineering features, and resultant user benefits, with the surpassing quality of this bearing line. No other standard bearing offers the broadest selection of in-stock sizes.

Seal Master Gold Line Ball Bearings

Offered with an almost unlimited selection of "custom design" features and options, as well as specially-engineered bearing types. Choose from optional construction materials, a wide range of mechanical modification and engineering adaptations, all carefully selected to allow you to satisfy your particular application requirements:

Specifications:

• A variety of shaft locking devices
• A broad selection of bearing seals
• Special internal and external fit-ups
• Special and premium lubricants
• Special housing configurations
• Corrosion-resistant plating's /coatings

Seal Master Gold Line Mounted Ball Bearings

Patented SKWEZLOC® Locking Collar Centers the Shaft in the Bearing Bore... Secures the Shaft with Near-Perfect Concentricity.

These premium Sealmaster bearings run quieter - the quality you equate with better performance and longer bearing life. This feature also allows operation at higher speeds than setscrew designs.

Seal Master Corrosion Resistant Ball Bearings

CRES stands for Corrosion Resistant Engineered Solutions a new look at corrosion resistant power transmission components.CRES Mounted Ball Bearing products start with the latest in corrosion resistance technology coupled with advanced industry minded features driven by industry-focused leaders. Finally, our engineers designed CRES around the notion that a "family" of corrosion resistant products spanning the spectrum of performance and value will provide customers flexibility and latitude to specify the correct solution .

Seal Master Gold Line Tapered Roller Bearings

The Industry's Only Heavy-Duty Bearing Units Of This Type In This Compact Size Range With Unitized, Self-Aligning Replaceable Cartridge Inserts.

RPB Series Bearings handle combination radial and thrust loads in a broad range of severe duty services... from aggregates to chemical processing... in sawmills and pulp and paper mills... and many more. They offer significantly increased overall reliability, substantially longer operating life, reduced maintenance and downtime.

Select From More Configurations, More Sizes For Maximum Choice:

Choose two and four-bolt pillow blocks in bore sizes from 1 3/16" - 5",
flange units and "One-size-fits-all" cartridge inserts in the full range of bore sizes, 1 3/16"-5".

Seal Master RPBXT/ERPBXT

Offers users significantly reduced costs for assembly and installation. This line of four-bolt non-expansion (RPBXT) and expansion (ERPBXT) roller bearing pillow blocks is available in bore sizes from 2 1/4" through 5" that interchanges shaft, centerline and bolt hole spacing with SAF Roller Bearings.

Seal Master RPB

Self-aligning tapered roller bearing offers important user benefits in performance and cost reduction - advantages not found in one-piece housings.

Product Details:

NSK-RHP is part of the international NSK group who are one of the world's leading manufacturers of rolling bearings, automotive components and mechatronic products. RHP ball bearing units combine a bearing, housing, and sealing components into a standardized form used in the key parts of equipment. They are versatile and easy to use.

 

Self-Lube is the registered trademark for the RHP range of wide inner ring bearings and mounted bearing units. Self-Lube units provide simple and effective bearing arrangements capable of accommodating moderate initial misalignment from mounting errors. They are easily mounted onto commercial shafting and are particularly useful where fabricated machine frames are employed. The units are available in a variety of pillow block and flange mounted configurations with one piece cast iron or two-piece pressed steel housings. Self-Lube inserts are wide inner ring ball bearings that are effectively and efficiently sealed. Simple fitting onto standard shafting is provided for by means of eccentric locking collar, set screws or adapter sleeve. The reliability, simplicity and ease of assembly of items in the Self-Lube range has resulted in their popularity for agricultural, extraction and construction machinery as well as process and automation equipment.

 

4 Bolt Round RHP Bearing Unit 80mm Shaft

The MFC80 Cast Iron Flange Bearing Units are widely used in the Manufacturing and Agricultural Industries.

 

Pillow Blocks 

Pillow blocks (plummer blocks) are the most common type of bearing unit. The complete units feature a bearing mounted in a simple, rigid housing. They are extensively used in a range of transmission equipment and general machinery.

Square Flanged Units 

These bearing housings have a square flange which can be easily attached to a machine with four bolts. With a simple mounting face, square flanged units are widely used.

Oval Flanged Units 

The bearing housing features a diamond-shaped flange for easy mounting to the machine base or side wall with two bolts. They are suited in applications where mounting space and the distance between shafts is small. Often, the spacing between bolt holes is equal to the diagonal positioning of square-flange types.

Ball Bearings: Set Screw Type 

Set screw ball bearings are specially designed for bearing units and come in a range of models depending on the mounting.

Ball Bearing Units Steel Series

The rolled steel microstructure is more consistent than cast iron or cast steel, reducing the risk of housing fracture under severe conditions. Rolled steel housing dimensions are consistent with cast units, allowing them to be interchanged with NSK standard housings and other manufacturers ISO standard.

Ball Bearing Units with Ductile Cast Iron Housing

NSK ductile iron series housings weight 40 % less in comparison with standard NSK housings made with gray cast iron. NSK ductile cast iron series housings are approximately 30% stronger than standard NSK housings made with gray cast iron. NSK ductile cast iron series housings are interchangeable with standard NSK ball bearing units.

Triple-Sealed Bearings for Ball Bearing Units

These reliable triple-sealed bearings are dustproof and waterproof. They ensure a longer bearing life even when exposed to heavy airborne dust and splashes of foul water.

Ball Bearing Units Stainless Series 

•  Guards against corrosion
  
•  Longer lubrication life
•  Maintains a clean operating environment
•  Low torque characteristics
•   Interchangeability

 

 

Product Details:

AMI Bearings, Inc., an Asahi Company, was established in 1990. Specializing in mounted bearings, AMI works toward meeting requirements of any application. It manufactures standard as well as custom mounted bearings. AMI Bearings finds application in many industries—especially in packaging and food industry. Lately, it has emerged as a leading supplier of mounted bearings in the United States.

AMI Bearings has a dedicated working team that strives for customer satisfaction. AMI Bearings believes in providing state-of-the-art services to its customer. It also provides CAD drawings for its customers in a variety of industries. Part of the reason for AMI’s quick success is its personal relationships with distributors, suppliers, customers, and employees. AMI’s working team is always ready for any new challenges.

AMI Bearings is headquartered in Mt. Prospect, Illinois, while its distribution centers are located throughout the United States and some parts of Canada.

AMI Mounted Bearings

Series highlights

• Inch and Metric bores available
• Interchangeability with major manufacturers
• Modifications Available
• Conform to ABMA, JIS & ISO Standards
• Silver Series (10mm to 35mm)
• Normal (1/2" to 3 1/2" and 12mm to 90mm)
• Medium (1" to 4" and 25mm to 100mm)
• Heavy (1" to 4 7/16" and 25mm to 140mm)

AMI Accu-Loc

Series highlights

• Inch & Metric (hard or soft)
• Honed races
• Cylindrical OD ("SUE200")
• Spherical OD ("UE200")
• Adapter inserts
• Buna-N seals
• Drop in replacement for Seal Master-Skwezloc
• Kanigen ("MZ20"), non-electrolytic nickel chromium - Designed for high washdown
• Black oxide - standard

AMI Free Spinning Inserts
Series highlights
Available for most inserts - Inch & Metric Interchangeable with major manufacturers Low starting & running torque Low viscosity oil or grease Complete non-contact seals No seal friction for low torque Ideal for packaging, printing machinery, In line systems and conveyor equipment

AMI High Temperature Mounted Bearings
Series highlights
All housing styles availableC4HR5 (maximum 400°F)C4HR23 (maximum 450°F)Special order units (up to 750°F)C4 internal clearance Silicone seals Zinc anodized slingers Steel cages High temperature lubricants Fixed & Float (expansion)

AMI Corrosion Resistant Mounted Bearings
Series highlights
Inch and Metric bores available Interchangeable with major manufacturers Meets HACCP requirements/FDA Approved Materials Relube or NEW Relube Free ("RF")Seamless stainless bushings (Thermoplastic)Zinc Plated and Stainless Steel available (Black Oxide, Thin Dense Chrome, and Kanigen made-to-order/special order)Stainless and Zinc (1/2" to 2 3/16" and 12mm to 50mm)Stainless "ER" Adapter Bearings (5/8" to 1 1/2")Larger sizes available upon request

AMI Shur-Seal Mounted Bearings
Series highlights
Inch and Metric bores available Keep lubricants in & contaminants out Spring loaded back seal Open & Closed end bearing cap Open End Caps Have Spring Loaded Shaft Seals Designed to Retrofit Existing Applications and 12mm to 50mmIdeal for HACCP monitored facilities, Food Processing, Wastewater Treatment, Packaging &Material Handling, Wood, Paper, Pulp and Gypsum & Particle Board

Product Details:

ASAHI BEARINGS

Established in 1928 as a manufacturer of ball bearings. In 1951 ASAHI SEIKO CO., LTD. started manufacturing Ball Bearing Units (Insert Bearing Units) for the first time in Japan. After 1975 ASAHI started other new products like mechanical clutches, air clutches/brakes and linear motion products. ASAHI is today is well respected worldwide as a leading Japanese brand.

ASAHI Ball Bearing Units has the best price performance ratio.

All product which we sell are the original products of ASAHI SEIKO CO., LTD. made in Japan.

PRODUCT RANGE:-

• STANDARD SERIES

ASAHI Bearing units consist of a double sealed single row deep groove ball bearing and any one of cast iron, synthetic rubber and presses steel housings of various configurations.

• SILVER AND STAINLESS SILVER SERIES

Silver series is compact and light-weight bearing units made of zinc-alloy diw casting and inner bearing is high carbo chromium steel or stainless steel (stainless silver series). The bearing units which save a money and energy. Eccentric locking collar or set-screw ensures fast and positive locking of bearing to the shaft. Quick, accurate positioning by center-line marks.

Food grease* can be filled in the bearing on request to secure safety for the application of food processing machinery.

• STAINLESS SERIES

This series provide the excellent corrosion resistance as well as self-alignment; all stainless steel insert bearings incorporated with solid stainless steel housings. Both insert bearings and housings are made of stainless steel suitable against many harsh atmosphere with stainless steel slingers.

Insert bearing MUC-type can have food grade grease, upon request, good for Food processing plants. Insert bearing MB-type is pre-lubricated with food grade grease as standard. Typical application: food processing machinery, chemical and agricultural machinery

• STAINLESS ECO SERIES

ASAHI ECO series is an excellent anti-corrosive bearing unit – the bearing is made of stainless steel equivalent to SUS440C, the housing is SCS13 stainless cast steel and the eccentric locking collar is SUS302 stainless steel. Eccentric collar ensures quick and positive locking to the shaft. Compact bearing unit enables compact machine designs, which ultimately helps to save energy and natural resource to keep environment clean.

Food grease* can be filled in the bearing on request to secure safety for the application of food processing machinery. Typical applications: food machinery, packaging machinery, chemical equipment.

• THERMOPLASTIC SERIES

Plastic series unit is consisted of the stainless steel insert bearing and the thermoplastic housing. It is self-aligning and anti-corrosive. The insert bearing is factory-prelubricated with FD-grease. The solid base housing does not easily allow bacteria to propagate and keeps good hygienic condition.

Typical application: Food-processing / packaging / textile machineries, chemical and hospital apparatus etc. Typical applications: food machinery, packaging machinery, chemical equipment.

Additional Information:

• Item Code: 8469
• Production Capacity: Max
• Packaging Details: Made in Japan

Product Details:

NTN Mounted Bearing Units

Regardless of your industry type, NTN offers a diverse series of mounted bearing units to fit your application. Whether for mining, construction, or food processing, NTN has the solution for your industry.

Ultra-Class™ Series

NTN’s Ultra-Class^™ is the original solid base offering in our mounted bearing unit portfolio. As our flagship bearing unit line, it symbolizes our commitment to performance and reliability. Ideal for applications where elements such as dry particle contamination and moisture are of concern, Ultra-Class provides a wealth of features and benefits to address these challenges. 

Available in metric and inch sizes, Ultra-Class units are made from heavy-duty, solid-cast housings and robust steel cages for optimal load & shock stability. The Ultra-Class line features pillow blocks, two-bolt and four-bolt flange housings. These units are fully assembled, factory sealed and pre-lubricated for easy installation.

Featuring NTN’s exclusive ball-point set screw design, the Ultra-Class™ black-oxide plated insert provides 120° screw orientation to provide superior alignment and centering compared to typical 90° configurations. The semi-retractable, ball-point mechanism’s excellent tightening torque characteristics allow 7.5x longer set screw retention life vs. cup point set screws, all without damaging to the shaft or mounting surface.

Using a combined elastomeric seal in tandem with NTN’s outer flinger design, each Ultra-Class mounted unit exhibits a fan-like mechanism that keeps particles from getting near the inner ball bearing and raceways, reducing wear and corrosion. Maintenance-free options with solid lubricant and NSF food grade grease are also available.

Green Line Series

The reliable performance and durable construction of NTN’s Standard/Green Lines Series bearings makes them a smart solution for practically all types of common applications. Green Line units’ unmatched selection of housing styles, insert types as standard makes it NTN’s tried and true Mounted Ball Bearing Unit Series.

Green Line units are available in both metric and inch shaft sizes throughout our set screw, eccentric, and adapter sleeve inserts. With bore sizes range from ½” to 4”, the Green Line is a highly versatile and industry interchangeable product line. The cast iron bearing housing is designed to provide maximum strength in even the toughest applications. With this strength, the ability to allow for misalignment of +/- 2° and relubrication capability, you just can’t go wrong.

Green Line units also feature double-sealing construction comprised of an oil-resistant rubber seal and a flinger. The double sealing construction boasts a sealing performance that is much more reliable than standard seals since the ingress path for dust is long, and because excess grease, which purges between the seal and the flinger when the bearing is in operation, serves as a seal.

Green Line Features & Benefits

§  Optimized lubrication hole design to ensure proper relubrication is achieved, even under the misalignment capability of +/2°
§  Fully assembled units arrive factory sealed and pre-lubricated for easy installation
§  Premium protection from contaminants due to unique flinger design and elastomeric seal
§  Heavy-duty, solid-cast housings & robust steel cages for optimal load & shock stability
§  Ball-point set screw offers 7.5x longer retention life over cup-point set screws

 

 

 

Product Details:

Hub City's major product Lines are: Bearings, Electric Motors, Farm Products & Accessories, Gear Drives, Gearmotors, High Efficiency Helical Drives, Speed Reducers, Washdown Products and Custom Products.

1. More than half of Hub's products are either modified or completely customized. One of the greatest benefits of doing business with Hub City is the strength of its engineering capabilities. Hub City prides itself in filling its customers' needs with cost effective solutions.

In addition to its successful custom product line, Hub City offers one an extensive, high quality standard product line, including a wide range of worm gear, bevel, parallel shaft and in-line speed reducers, mounted bearings and the Mina-Gear® subfractional horsepower gearmotors.

Recent product line additions include the following: PowerTorque® Shaft mount reducers featuring ductile iron housings and precision ground gearing. DuraLine Mounted Bearings provide long-life and economy in the most popular sizes of pillow blocks, flange blocks and flange bracket bearings.

Hub City Industries Search Parts on Manufacturer Site Find your part number on the manufacturer site, then search that number in our catalog using the search bar above. Hub City manufactures power transmission products - including bearings, motors, gear drives, and speed reducers - for applications in recreation, transportation, military, packaging, construction, communication, material handling, medical and food processing equipment.

Hub City's major product Lines are: Bearings, Electric Motors, Farm Products & Accessories, Gear Drives, Gearmotors, High Efficiency Helical Drives, Speed Reducers, Washdown Products and Custom Products. More than half of Hub's products are either modified or completely customized. One of the greatest benefits of doing business with Hub City is the strength of its engineering capabilities. Hub City prides itself in filling its customers' needs with cost effective solutions. Hub City Standard Products In addition to its successful custom product line, Hub City offers one an extensive, high quality standard product line, including a wide range of worm gear, bevel, parallel shaft and in-line speed reducers, mounted bearings and the Mina-Gear® subfractional horsepower gearmotors.

Recent product line additions include the following: PowerTorque® Shaft mount reducers featuring ductile iron housings and precision ground gearing. DuraLine Mounted Bearings provide long-life and economy in the most popular sizes of pillow blocks, flange blocks and flange bracket bearings

Product Details:

The housings are mainly casting housings. There are pressed steel plate housings as well align withease during operation and can be conveniently mounted or dismounted.The bearing units can operate satisfactorily under working conditions, especially for machines operatingin dusty or muddy surroundings. Thus, they are widely used in agricultural, construction and transmissionmachineries, etc..There are various types of sealing devices for our products, such as synthetic rubber seals, slinger withsynthetic rubber seals and triple lip seals etc..Sufficient lubricating grease has been put into the bearings during manufacturing, which can act aslubricating as well as rust proof. No more grease is needed to put in during the lubricating periodwhen the bearings operate under normal conditions. Lubricating grease can be added from the fittingswhen the relubricate bearings operate under hard conditions.The outer ring of the bearing has spherical outside surface which can be fitted to the concave sphericalsurface of the housing, and the fit between them can be clearance fit or interference fit according todifferent conditions. This combination provides self-alignment between the self-contained bearing andthe housing, and compensates for a certain alignment errors or flexing of the shaft when the bearing is inoperation. This definitely increases the bearing service life.

Product Details:

GB SPLIT BEARINGS

The split bearing was invented in 1907 and its design has remained largely unchanged. Through innovative new components the GB Split Bearing is able to offer significantly increased capacities, flexibility and simplicity of fitting & maintenance.

The entire split bearing has been designed around the bearing cages and the numbers are quite breath-taking; the patent-pending bearing cage, Roller train, has allowed an increased radial and axial capacity of up to 70% and 1000% higher than any other split bearing in the world. The dramatic capacity increases allow Split Bearing to replace five series of split bearings with a single series which covers almost all existing requirements.

The evolved design and working of the new split bearings will increase load capacities, by incorporating radial and axial elements that work separately. By extending the operating envelope for high thrust load applications, this is the one and only bearing for the job.

The split bearing is incomparable to its competitors bringing an 70% increase to radial load and up to 1000% axial capacity increasement.

KEY FEATURES

• The split bearing also includes a sturdy axial cage, triple labyrinth seals and an extension seal.
• It will suit shafts from 30mm to 160mm, 1.1/4” to 6” in diameter.

 

Applications:

 

·         Mining

·         Quarries

·         Oil drilling

·         Motors

·         Ferries

With our extensive domain experience, VW impex is indulged in offering a quality range of Split Bearings. Feel free to contact us.

 

Product Details:

Craft Split Bearing Co is a Virginia-based manufacturer of split cylindrical roller bearings and a recognized leader in split bearing technology. The great advantage of a split bearing is its ease of replacement in the event of a bearing failure. Because the bearing is split down the shaft so that all components, even the sels, can be easily replaced, the task of replacing a bearing becomes a minor one.

The Craft Split Bearing is not only durable and rugged but contains many innovative features for which Craft has received patents. For example, all of the Craft pillow block bearings have a standard base-to-center height (although custom, metric, and large-bore bearings are also available).

Features of the Craft Split Bearing Pillow Block (Housing Cap)

Houses either an expansion (FL) or non-expansion bearing (HD). Inside diameter is spherically machined to accept the cartridge assembly, allowing the pillow block to compensate for misalignment up to 3%. Base-to-center height meets industry standards.

Cartridge

The spherically machined cartridge takes initial shaft misalignment externally, allowing the bearing and seals to remain parallel to the shaft at all times. Each cartridge comes drilled, tapped, and plugged in its lower half so that lubricant can be purged.

Outer Race

Made of 52100 steel, hardened to a Rockwell COF 59/62. The outer race joints are cut in a chevron so that the roller is carried across the split. The outer race comes in either a FLOAT (FL) or HELD (HD) type.

Aluminum Triple Labyrinth Seals

Craft's triple-labyrinth seals, unlike felt or lip type seals, rotate with the shaft eliminating and chance of shaft wear caused by the seal.

Inner Race

Made of 52100 steel, hardened to a Rockwell C 59/62. The split of the inner race is cut at a precise angle so that when the rollers cross the split they are carried across, having only point contact with the split.

Clamp Collars

Made of 4142 alloy and thru hardened rather than flame hardened. The inside lips of the clamp collars form the running track of the rollers and act as guides for the rollers. The Clamp Collars also assist the HD (Held) bearings in accepting axial loads.

Pillow Block Pedestal Housing

Like the cartridge, the split pedestal housing is made of high-quality, strong ductile iron and can be easily disassembled (by removing two bolts) for bearing replacement.

 

 

 

Product Details:

Established in 1985, LDK Bearings is one of the leading manufacturer of Mounted units and Rod end bearings in China. The Company was IS9001, ISO14001 &OHSAS18001 certified since 1995. We are providing reliable bearing products and solutions to target industries like Agriculture, Textile, Mining, Food & Beverage, Recreational vehicles, Snowmobile & ATV/UTV, Lawn & Garden, Pharmaceutical, Chemical processing, Printing, Airport, Aviation, HVAC and various kinds of conveying, rolling and oscillating devices.

New Products:

• Concentric Locking Insert Bearings
• Stainless Steel Plain Bearings
• Waterproof Plastic Bearing Units
• Water Lubricated Bearing
• Solid Grease Bearings
• Wear-Resistant Plain Bearing
• Plastic Plain Bearings
• F Type Seal Insert Bearings
• Plastic Rod End Bearings
• Air Handling Bearings
• Intelligent Bearing