Power Transmission

Approx. Rs 6,500 / Piece Get Latest Price

PAGUFLEX® PLUS shaft couplings... the sure, uncomlicated, economical solution, if angled, radial and/or axially displaced drive shafts are to be frictionally connected.

PAGUFLEX® PLUS shaft couplings

The double loop-shaped, thermoplastic compensating element of the coupling HYTREL®, a Thermoplastic Ether Ester Elastomer (TEEE) from DuPont.

Owing to the hogh reverse bending strenght of the flexible material and the cardan-like shaping of the power transmitter, this development is the ingenious, technical solution for shaft displacement problems in motive power engineering and in measurement and control techniques.

Recommendations fpr our products come from the design of:
shaft-anle encorders, counting mechanisms, tachogenerators, servo valves, elevating tables, feeding drives, pumps, compressors and ventilators, kitchen equipment, office systems, textile machines and for numerous applications in the automobile and aircraft industries.

The one-piece coupling works frictionless, waerless and silently, and without any troubling effects (i. e. without troubling structure-borne sounds).

Thus in changes of direction of rotation or during torque fluctuations with load direction reversal, PAGUFLEX® PLUS enables play-free and shock-free power transmission, together with effective vibration damping and sound insulation.

In noumerous technical applications the material HYTREL® has been successfully substituted not only for established thermoplastics but also for elastomers. In combines ideally the advantages of both materials and therefore is the innovation for flexible shaft couplings.

It enables the opening up of new areas of application in extremely low and high temperatures. Also in association with media in which owing to their sensitivity elastic elements have shown themselves to be of `limited use´. Further applications are those in which up to now the reverse bedning strenght of the material has set narrow limits with regard to mechanical fatigue loading. In these,
PAGUFLEX® PLUS is now the solution.

The high flexibility of the thermoplastic coupling element effectively lightens the burden of the shaft bearings of motors and machines even in circumstances of large radial and angular, alignment errors. With the help of PAGUFLEX® PLUS, the bearings run quieter, warm up less and achieve longer durability, thus lengthening service life.

 

PAGUFLEX® PLUS - plus points

- high torsional rigidity with optimal beeding and traction or thrust flexibility

- ingeniously simple constructional principle

- one-piece design - without play, friction, wear and structure
vibrations

- simple fitting, no extra machining of the shaft journals

- minimum fitting volume, radially and axially

- extremely high, permissible displacement error values:
angular approx. Ø ±15°, radial approx. Ø ±3 mm and
axial approx. 10 to 20  mm

- coupling can be used as an universal joint for large or inermittent bending angles of the shaft

- elastic element made of HYTREL® (Thermoplastic Ether Ester Elastomer, TEEE); enabling:

- high operational reliability in the temperature
range between -40 °C und +100 °C

- outstandig chemical resistance to acids, alkalis,
solvents, oils, gases, ozone

- high tear propagation resistance, high low- temperature flexibility, high abrasion resistance and reverse bending strenght

- Iisulation from heat, structure-borne noise and leakage currents

- damping of vibration and shock

- relieves the motor/machine shaft bearings of lateral and axial forces

- steel bosses with corrosion-protected, galvanised surface

Approx. Rs 3,500 / Piece Get Latest Price

The double loop coupling uses a moulded plastic element permanently swaged to steel or stainless steel hubs to give a compact design. It forms an effective two-stage coupling with exceptional flexibility in all three modes. Ideal for transmitting rotation in small drives, this type of coupling works without any friction, wear or noise, although its low torsional stiffness makes it less suitable for high precision positioning applications.

Exceptional flexibility in all three directions: radial, angular and axial.

Product Features

• Speeds: Up to 3000 rpm 
• Peak Torque Largest Size lbs.-in (Nm): 159 (18) 
• Standard Bores in. (mm): 1/8" -5/8" (3 to 16) 
• Temperature: -40° to +210°F , (-40° to +100°C)
• Electrically Isolating: Yes
• Connection: Set Screw
• Exceptional flexibility
• Compact design
• Outstanding resistance to acids, alkilis, solvents,oils, greases, ozone
• Tough double-loop elastomeric element made from HYTREL®
• Zinc plated steel hubs

Approx. Rs 9,900 / Piece Get Latest Price

Coup-Link is a full line of zero backlash flexible shaft  including Beam, Bellows, Jaw, Disc and Oldham.  All are available in a variety of mounting options including set screw, keyway, clamp, conical and shrink disc configurations.

Beam, Disc, Jaw, Bellow, Encoder and Oldham couplings

Motors, reducers, encoders, shafts and other rigid elements often fail prematurely. Many times this is from misalignment, which often leads to bearing, shaft or seal failure. Zero backlash, flexible shaft couplings  accommodate parallel and angular misalignment and shaft endplay.

Properly selecting a Candy Coup-Link provides the flexibility to handle many types of misalignment and may offset problems such as minor design errors or improper assembly.

Approx. Rs 5,000 / PCS Get Latest Price

Product Brochure

REEL Antriebstechnik GmbH can look back today on a company history that has started more than 50 years ago. In the course of these years we have gained in the field of drive systems an excellent reputation beyond regional limits and are operating today on an international level. In addition to our drive solutions already established on the market, we can offer thanks to our very close customer contacts particularly flexible and economical drive system solutions.

REEL Elastic couplings are used in general mechanical engineering everywhere, where a reliable power transmission is required even with often unavoidable dislocations of the waves. Their torsional flexibility enables them to shift critical torsional vibrations from the operating area of ¿¿¿¿¿¿the machinery so that no negative effects are to be expected. In addition, they allow the passage of critical speed ranges through the high material damping of the elastic elements, wherein the resonance peak can be kept within limits. In addition, system-related shocks are damped, whereby the coupled machine parts are protected.

REEL PRODUCST AS BELOW

Elastic bolt coupling ELBO-B
Elastic toothed ring coupling ZARIFLEX
Elastic cam coupling REELFLEX
Elastic pin coupling ELBO-R
Elastic double cam clutch REEL
Classic V-belt pulleys
Wide V-belt pulleys
Narrow V-belt pulleys
Flange hubs for taper bushings

Flywheels and wheels

Approx. Rs 5,000 / Piece Get Latest Price

UNI-Coupling is part of United Pipeline Products.
United Pipeline Products has been the total supplier of stainless steel repair clamps and couplings for over 25 years. The modern factory and central office is located in the province of Noord Brabant in the town of Sint Oedenrode. With more than 50 employees we manufacture from this location reliably providing unique products for many industries around the world.

Based on customer specifications, we deliver repair clamps and couplings for pipes. Our products meet all current standards for drinking water, gas, oil pipelines and recently also in the petrochemical pipelines onshore and offshore industry. The products from the UNI-Cou­pling Line are very interesting for the shipping, construction and other industries.

Products as below




 UNI-Rep UNI-FlexUNI-PlastgripUNI-CombigripUNI-Grip

Approx. Rs 6,000 / Piece Get Latest Price

Approx. Rs 4,500 / Piece Get Latest Price

Donghua's product range has grown steadily over the past decades. With the targeted focus on the needs of customers and the associated requirements, as well as intensive development work, Donghua has developed into a specialist in many different fields of application. 

From the classic drive task through the use of safety-relevant lifting chains to the manifold possibilities of use in the transport of people or products of all kinds - we are always aware of our responsibility. 

Approx. Rs 1,000 / Piece Get Latest Price

Power Transmission Strongbelt GmbH in Gütersloh has been successfully operating internationally since 1982 in drive technology. Our high-quality drive belts are manufactured all over Europe with German know-how. The metal drive elements are produced according to European guidelines in the Far East in our known quality and imported accordingly. 

Products as below

Sheathed V-belts Flank open, molded V-beltskraftbandsribbed beltsAutomotive drive beltconveyor beltsFlat belts, transport beltsTiming belt ChloropreneTiming belt polyurethaneV-grooved pulleys, timing pulleysRoller chains, sprocketsChain guides, belt guidesclutches

Approx. Rs 6,500 / Piece Get Latest Price

TB Wood's is an industry leading designer and manufacturer of mechanical power transmission equipment for industrial applications. Our mechanical product lines include: synchronous, v-belt, and belted variable speed drives; grid, disk, jaw, gear and elastomeric coupling products; sheaves and bushings, sprockets and clutches. Registered trademarks include Sure-Flex®, Dura-Flex® Form-Flex®, G-Flex® and Sure-Grip® Bushings.

Couplings

Approx. Rs 3,500 / Piece Get Latest Price

Tollok S.p.A are a leading manufacturer of locking bushes with plants in Italy and the USA. They joined the Rexnord Group in 2015. Their wide range allows these friction connections to replace keyways in all industrial machinery.

TLK110 COMPACT LOCKING BUSHES

Shafts 6 to 130mm

Thin wall construction suits hubs with

small diameters, interchangeable with some ETP products.

Medium torques

Self-centering

No axial hub movement during mounting

Very low surface pressures

 

TLK130/131 GENERAL PURPOSE LOCKING BUSHES

Shafts 20 to 180mm

General purpose designs, TLK131 prevents axial hub movement during mounting Medium to high torques        

Self-centering

Low to medium surface pressures

Economic

 

TLK200 INDUSTRY STANDARD LOCKING BUSHES

Shafts 20 to 900mm

General purpose bushes to industry standard

dimensions accepting wide tolerances

Medium to high torques

Not self-centering (use a guide)

Medium to high surface pressures

No axial hub movement during mounting

Readily available

Concentricity depends on guide

 

TLK350 EASY MOUNTING LOCKING ASSEMBLIES

Shafts 6 to 50mm

Economical bushes with few screws to

make mounting easy

Medium to high torques

Self-centering

Small hub movement during mounting

Very low surface pressures

Good concentricity 0.02 - 0.04 TIR

 

TLK400/450 HEAVY DUTY LOCKING BUSHES

Shafts 25 to 400mm

High torque transmission with the capacity to

accept bending moments from rolls.

Very high torques

Self-centering

TLK400 has no hub movement during

mounting, TLK450 has small movement but

7% more transmittable torque.

Low surface pressures

Good concentricity 0.02 - 0.04mm TIR.

 

TLK 132/133/134/139 BUSHES

Locking bushes that are variants on the popular 130/131 series.  Suits shafts from 14 to 200mm, medium torques, economic prices

 

TLK250 LOW COST BUSHES

Simple low torque locking bushes that are fixed by a ring nut around the shaft, sizes 14 to 70mm.

 

TLK300 LOCKING RINGS

Taper rings in pairs suiting integration to machine designs where the axial force is applied externally, shafts 6 to 540mm.

 

 

 

 

 

 

 

Approx. Rs 15,000 / pcs Get Latest Price

Product Brochure

WiCHMANN Cardan shafts are the right choice for the most difficult and the most challenging operating conditions (in particular in the field of heavy-duty Cardan shafts from XL to XXL+):

• Unsplit bearing eyes
•  Maintenance-free function
• Highest possible strength and minimum deformation under load
• Maximum journal cross bearing capacity
• Specific material selection and treatment
• Optimum weld connections
• Perfected geometry due to computer analyses